TL-SL3428_V3_User_Guide - TP-Link

writing only and changes can be made to the assigned SNMPView. The View defined both as the Read View and the Write Viewcan be read and modified.Notify View:Select the View to be the Notify View. The management stationcan receive notification messages of the assigned SNMP viewgenerated by the Switch's SNMP agent.‣ Group TableSelect:Group Name:Security Model:Security Level:Read View:Write View:Notify View:Operation:Select the desired entry to delete the corresponding group. It'smulti-optional.Displays the Group Name here.Displays the Security Model of the group.Displays the Security Level of the group.Displays the Read View name in the entry.Displays the Write View name in the entry.Displays the Notify View name in the entry.Click the Edit button to modify the Views in the entry and click theModify button to apply.Note:Every Group should contain a Read View. The default Read View is viewDefault.12.1.4 SNMP UserThe User in a SNMP Group can manage the switch via the management station software. TheUser and its Group have the same security level and access right. You can configure the SNMPUser on this page.Choose the menu SNMP→SNMP Config→SNMP User to load the following page.171