WAUKESHA Manuale Inglese AP2 - Asco Pompe Srl

Waukesha Cherry-Burrell MaintenanceRear Bearing AssemblyModels 006, 014, 015, 018, 030, 034 and 040 use a single ball bearing assembly for rear bearing. All other models use atapered roller bearing assembly similar to front bearings.1. Unwrap rear bearing assembly. DO NOT interchange parts of one bearing assembly with another. These parts areprecisely matched during manufacturing and must be installed as a matched assembly.2. For models with ball bearing assemblies:Lubricate shaft inner bearing race with oil or grease. Press bearing into place. Shielded side of bearing fits againstbearing spacer. Press only on inner race.For models with tapered roller bearing assemblies:Lubricate shaft bearing area with oil or grease. Follow “Front Bearing Assembly” procedures on page 34.NOTE: Heating bearings is NOT recommended. If bearings are heated, do not exceed 300°F (149°C).Figure 53 - Rear Tapered Roller Bearing AssemblyRevised: February 2007 95-03015 Page 35