AN-PR1000H Operation-Manual GB - Sharp

AN-PR1000HENGLISHSystem connections• Installing the main unit and the subwoofer1. Pull up both speakers outwards.4. Turn the unit. Stick the metal frame cushion onto the metal frame and place theglass shelf on top of it.Top glass coverTop glass cover cushionSticker up sideProtectionsheetMetal frame cushion2. Pre-fasten the screw to the speaker box.Glass shelfPreparation for Use3. Follow below steps to fix the metal frame.Insert the metal frame in a slant position and secure it onto the screws.Pull up the other side of the metal frame to position and tighten all screws.Sticker up sideNotes:• It is advisable for the top glass cover to be carried by 2 persons.• Top glass with sticker on its surface, must face upwards.• Metal frame must not be removed to ensure safety.• The maximum load for the top glass cover on the unit is 100 kg.• Aerial connectionSupplied FM aerial:Connect the FM aerial wire to the FM 75 OHMS socketand position the FM aerial wire in the direction wherethe strongest signal can be received.Note:Placing the aerial on the unit or near the AC power leadmay cause noise pickup.Place the aerial away from the unit for better reception.FMaerial• External FM aerialUse an external FM aerial if you require better reception. Consult your dealer.ExternalFM aerialE-975 ohmscoaxial cableNote:When an external FM aerial is used, disconnect the supplied FM aerial wire.