AN-PR1000H Operation-Manual GB - Sharp

More documents

Recommendations

Info

AN-PR1000HENGLISHSystem connections• Installing the main unit and the subwoofer1. Pull up both speakers outwards.4. Turn the unit. Stick the metal frame cushion onto the metal frame and place theglass shelf on top of it.Top glass coverTop glass cover cushionSticker up sideProtectionsheetMetal frame cushion2. Pre-fasten the screw to the speaker box.Glass shelfPreparation for Use3. Follow below steps to fix the metal frame.Insert the metal frame in a slant position and secure it onto the screws.Pull up the other side of the metal frame to position and tighten all screws.Sticker up sideNotes:• It is advisable for the top glass cover to be carried by 2 persons.• Top glass with sticker on its surface, must face upwards.• Metal frame must not be removed to ensure safety.• The maximum load for the top glass cover on the unit is 100 kg.• Aerial connectionSupplied FM aerial:Connect the FM aerial wire to the FM 75 OHMS socketand position the FM aerial wire in the direction wherethe strongest signal can be received.Note:Placing the aerial on the unit or near the AC power leadmay cause noise pickup.Place the aerial away from the unit for better reception.FMaerial• External FM aerialUse an external FM aerial if you require better reception. Consult your dealer.ExternalFM aerialE-975 ohmscoaxial cableNote:When an external FM aerial is used, disconnect the supplied FM aerial wire.
AN-PR1000H• Subwoofer connectionMake sure to leave the AC power lead disconnected when connecting the subwoofer.•Using other subwooferYou can connect a subwoofer with an amplifier to the SUBWOOFER PRE OUT socket.ENGLISH1. Connect the wire to the speaker terminal.Audio cable(commerciallyavailable)Audio signalCommercially available subwoofer(amplifier built in)To audio input socketSpeaker terminalSpeaker wireMain unitTo SUBWOOFER PREOUT socketNotes:• No sound is heard from the subwoofer without a built-in amplifier.• When not using the supplied subwoofer, disconnect the speaker wire from the mainunit.• You may use the supplied subwoofer and a powered subwoofer at the same time.Preparation for UseE-10
Page 1 and 2: MODELLMODÈLEMODELOMODELLOMODELAN-P
Page 3 and 4: Når ON/STAND-BY-knappen er sat i S
Page 5 and 6: Hergestellt unter Lizenz von Dolby
Page 7: Informazioni per un corretto smalti
Page 10 and 11: AN-PR1000HENGLISHGeneral Informatio
Page 12 and 13: AN-PR1000HENGLISHControls and indic
Page 14 and 15: AN-PR1000HENGLISHGeneral Informatio
Page 18 and 19: AN-PR1000HENGLISHSystem connections
Page 20 and 21: ON/REMOTESTAND-BY TIMERSENSOR VOLUM
Page 22 and 23: AN-PR1000HENGLISHAudio connections
Page 24 and 25: AN-PR1000HENGLISHGeneral control•
Page 26 and 27: AN-PR1000HENGLISHListening to the p
Page 28 and 29: AN-PR1000HENGLISHEnjoying surround
Page 30 and 31: AN-PR1000HENGLISHBasic OperationEnj
Page 32 and 33: AN-PR1000HENGLISHListening to the r
Page 34 and 35: AN-PR1000HENGLISHUsing the Radio Da
Page 36 and 37: AN-PR1000HENGLISHUsing the Radio Da
Page 38 and 39: AN-PR1000HENGLISHTimer and sleep op
Page 40 and 41: AN-PR1000HENGLISHTimer and sleep op
Page 42 and 43: AN-PR1000HENGLISHOperating the TV o
Page 44 and 45: AN-PR1000HENGLISHAdvanced FeaturesC
Page 46 and 47: AN-PR1000HENGLISHReferencesTroubles
Page 48 and 49: MITTEILUNG/ LE MÉMO/ EL MEMORÁNDU
Page 50 and 51: SHARP ELECTRONICS (Europe) GmbHSonn

AN-PR1000H Operation-Manual GB - Sharp

Create successful ePaper yourself

Delete template?

Save as template?