AN-PR1000H Operation-Manual GB - Sharp

AN-PR1000HENGLISHBasic OperationEnjoying surround sound (sound mode) (continued)• Audistry sound modeEnjoy a variety of sounds by each or any combination of the 4 modes.Press the button for your desired mode.Press it again to cancel.When selecting"SOUND SPACE"When selecting"INTELLIGENTVOLUME"Possible combinationsWhen you select"SOUND SPACE"When you select"NATURAL BASS"When you select"INTELLIGENT VOLUME"When you select"MONO TO STEREO"When you select"DVS"SOUNDSPACENATURALBASSWhen selecting"NATURALBASS"When selecting"MONO TOSTEREO":EnabledINTELLIGENTVOLUME:DisabledMONO TOSTEREOSOUND SPACE(Sound stage expansion)The 4 speakers create spaciousstereo sounds.NATURAL BASS(Bass sound expansion)The system's low-frequencycharacteristics realise the optimalbass sounds.INTELLIGENT VOLUME(Peak limiter and expander)Appropriate listener-friendlyvolumes realised; the volumeis decreased during loudsounds, and increased duringlow sounds.MONO TO STEREO(Mono Stereo conversion)You can enjoy monauralsound sources with a stereolikeeffect.(The SOUND SPACE indicator lights up.)(The NATURAL BASS indicator lights up.)(The INTELLIGENT VOLUME indicator lights up.)(The MONO TO STEREO indicator lights up.)Notes:• When setting each mode of Audistry to "ON", the preset sound mode setting is cancelled.• When setting the SOUND SPACE or MONO TO STEREO mode to "ON", the DVSsetting is also cancelled. (It is not cancelled even if the NATURAL BASS or INTEL-LIGENT VOLUME mode is set to "ON".)• The SOUND SPACE or MONO TO STEREO mode may not be activated dependingon the input signal type. If the SOUND SPACE or MONO TO STEREO indicatorblinks, the effect of these modes cannot be obtained.E-23