spec - Local Sector 7 web page

¢KSC 3929 SCSI-CAMAC file location ives the location of Kinetic Systems suppliedinterface file for their model 3929 SCSI-to-CAMAC crate controller. ¢ Ifusing the CSS-supplied software on the HP platform, enter no . Ifusing theCSS-supplied driver on the SunOS 4.1 platform, enter no .¢Nat Instr GPIB file location ives the path name of the cib.o file that may beneeded to be linked with spec when using National Instruments GPIB ¢ boards.Youmay enter no for the PCII and AT-GPIB models of the board for PC computers,for the SB-GPIB board with versions 1.3 and 2.1 of the driver for Suncomputers, for the 1014-1S board for Sun computers and for the boards forIBM PS/2 and RS/6000 AIX systems.SICL GPIB library flags ¢¥¤ ets the flags required to load the libsicl.a file, necessary ifyou are using the SICL GPIB presently supported on HP 700 series platformswith either HP or IOtech devices. Note, CSS has an alternative to the IOtechversion of libsicl.a for the SCIS488/H product. Contact CSS for more information.VME hardware support ¢¥¤ elects whether to include direct support for VME hardwarein the installed program. Note, this option does not refer to the VMEhardwared used in ESRF and EPICS environments.¢Nat Instr VME file location ives the location of the nivxi.o file that will be neededto be linked in with spec if you are using a National Instruments VME ¢ controller.¡Extra compiler flags llows you to add extra compiler flags for both compiling thesite-dependent source files and linking.¢¡Extra object files llows you to specify extra site-dependent object files to includewhen linking the spec executable.¢¡Extra library flags llows you to specify extra site-dependent libraries to besearched during the link phase when producing the spec executable.¢INTERIM WORK-IN-PROGRESS (8/16/01) NOT FOR GENERAL DISTRIBUTION ADMINISTRATOR’S GUIDE 191