spec - Local Sector 7 web page

DSP 6001/6002 CAMAC With No Driverconfig file:PC_DSP6001 = base_addressedconf interfaces screen:CAMAC DEVICE ADDR MODE TYPEYES 0x240 DSP 6001 with PC004 (no driver)Use this entry to select the DSP 6001/6002 CAMAC controller on a PC, if you aren’tusing a driver. Nointerrupt is used in this configuration.Kinetic Systems 3988 GPIB To CAMACconfig file:GP_KS3988 = gpib_address INTR|POLLedconf interfaces screen:CAMAC DEVICE ADDR MODE TYPEYES 7 POLL KS 3988 GPIB Crate ControllerUse this configuration for the Kinetic Systems 3988 GPIB-to-CAMAC controller.This controller may be used in a polled or interrupt-driven mode. In interrupt-drivenmode, a CAMAC look-at-me (LAM) generates a GPIB service request (SRQ), which inturn, will call a spec interrupt service routine. Interrupt-driven mode is currentlyonly available with National Instruments GPIB controllers, and only when not usingthe cib.o GPIB configuration (see below). If multiple versions of spec are sharing thecontroller on the same computer,the controller must be operated in polled mode.DSP CC-488 GPIB To CAMACconfig file:GP_CC488 = gpib_address INTR|POLLedconf interfaces screen:CAMAC DEVICE ADDR MODE TYPEYES 7 POLL DSP CC-488 GPIB Crate ControllerThis configuration is for the DSP CC-488 GPIB-to-CAMAC controller. This controllermay be used in a polled or interrupt-driven mode. In interrupt-driven mode, aCAMAC look-at-me (LAM) generates a GPIB service request (SRQ), which in turn,will call a spec interrupt service routine. Interrupt-driven mode is currently onlyavailable with National Instruments GPIB controllers. If multiple versions of specINTERIM WORK-IN-PROGRESS (8/16/01) NOT FOR GENERAL DISTRIBUTION HARDWARE REFERENCE 217