vi<strong>Compool</strong> <strong>to</strong> <strong>EasyTouch</strong> <strong>Upgrade</strong> System Kit ContentsThe following items are included in the <strong>Compool</strong> <strong>to</strong> <strong>EasyTouch</strong> <strong>Upgrade</strong> System kit.• <strong>Compool</strong> To <strong>EasyTouch</strong> <strong>Upgrade</strong> Kit (P/N 521107) - For upgrading CP3xxx systems• <strong>Compool</strong> To <strong>EasyTouch</strong> <strong>Upgrade</strong> Kit with Transformer (P/N 521247) - For upgrading Cp100, Cp1000,Cp2000 system.• Temperature sensor with 20 foot cable, o-ring and hose clamp (P/N 520272) - Uses for the watertemperature sensor• Temperature sensor with 40 inch cable - Used for the air termperature sensor• <strong>Compool</strong> <strong>to</strong> <strong>EasyTouch</strong> <strong>Upgrade</strong> Pool and Spa Control System Installation and User’s Guide(this manual)Optional Equipment• IntelliChlor Electronic Chlorine Genera<strong>to</strong>r Electrolytic Cell - IC20 (P/N 520554),IC40 (P/N 520555) or IC60 (P/N 521105)Accessory EquipmentPOWER ON<strong>EasyTouch</strong> 8 Indoor ControlPanel Kit (P/N 520549)<strong>EasyTouch</strong> Wireless Control Panel(8 circuit) Kit (P/N 520547)iS10 Spa-SideRemote Controller (P/N 520149)iS4 Spa-Side RemoteController (P/N 520094)QuickTouch ® wireless remote controllerKit (P/N 520148)<strong>EasyTouch</strong> Accessories (continued)<strong>EasyTouch</strong> Indoor Control Panel, 8 Circuits (P/N 520549)<strong>EasyTouch</strong> Wireless Control Panel, 8 circuits (P/N 520547)iS4 Four-Function Spa-Side remote, <strong>15</strong>0 ft. cable (P/N 520094)iS10 Ten-Function Spa-Side remote, <strong>15</strong>0 ft. cable (P/N 520149)QuickTouch four-function wireless remote kit with transceiver assembly (P/N 520148)IntelliChlor Acid Cleaning Kit (P/N 520670)IntelliChlor Spacer pass-through cell for new pool start-up (P/N 520588)Technical SupportSanford, North Carolina (8 A.M. <strong>to</strong> 5 P.M.)Phone: (800) 831-7133 - Fax: (919) 566-8920Moorpark, California (8 A.M. <strong>to</strong> 5 P.M.)Phone: (800) 831-7133 - Fax: (805) 553-55<strong>15</strong>visit www.pentairpool.com and www.staritepool.com<strong>Compool</strong>/<strong>EasyTouch</strong> Pool and Spa Control System <strong>Upgrade</strong> Installation and User’s Guide
1Section 1Overview<strong>Compool</strong> ® <strong>EasyTouch</strong> ® Pool and Spa Control System <strong>Upgrade</strong> OverviewWelcome <strong>to</strong> the <strong>Compool</strong> <strong>EasyTouch</strong> upgrade Pool and Spa Control system − The next generation inau<strong>to</strong>matic control systems. Your <strong>Compool</strong> <strong>EasyTouch</strong> upgrade system opens up a wide range of au<strong>to</strong>mationfeatures. Your <strong>EasyTouch</strong> eight auxiliary system allows you <strong>to</strong> au<strong>to</strong>matically control all of your spa and pooldaily operations. Pool and spa service operations can be manually controlled from the <strong>EasyTouch</strong> outdoorcontrol panel located at the pool equipment pad. Also available is the optional Indoor Control Panel andWireless Control Panel which allows au<strong>to</strong>matic control of pool and spa operations from inside your home oroutside around your pool area.The <strong>EasyTouch</strong> eight auxiliary circuit system is fac<strong>to</strong>ry configured <strong>to</strong> operate as a “shared” equipment systemor it can be configured as a “single body” system (see page 64). For <strong>EasyTouch</strong> menu settings, see page 14.The <strong>EasyTouch</strong> eight auxiliary system can control high voltage (120 VAC / 240 VAC) equipment, au<strong>to</strong>maticvalve actua<strong>to</strong>rs, pumps, lighting, a conventional heater or a solar heating system and the optional IntelliChlorsalt chlorine genera<strong>to</strong>r.<strong>Compool</strong> upgrade systemsThe following <strong>Compool</strong> systems can be upgraded <strong>to</strong> the <strong>Compool</strong>/<strong>EasyTouch</strong> system: <strong>Compool</strong> CP3xxxmodels (see page 66 and 67), also <strong>Compool</strong> TimeMaster, CP/LX100, CP1000, CP2000 and CP3000 models.Note: To upgrade <strong>Compool</strong> TimeMaster, CP/LX100, CP1000, CP2000 models requires <strong>Compool</strong>/<strong>EasyTouch</strong> control panel upgrade kit with transformer P/N 521247). Otherwise CP3xxx systemsrequire P/N 521107. For <strong>Compool</strong>/<strong>EasyTouch</strong> Control Panel with or without Transformer Kit installationinstructions, see page 65).Operating <strong>EasyTouch</strong>The <strong>EasyTouch</strong> system is designed <strong>to</strong> au<strong>to</strong>matically control your pool and spa equipment, lights and otheroptional equipment. However, you can also manually control all <strong>EasyTouch</strong> system operations from the outdoorcontrol panel. Using the “Mode” but<strong>to</strong>n, the system can be switched from “Au<strong>to</strong>” mode (normal operatingmode) <strong>to</strong> “Service” mode for manual operation and service purposes. Using the outdoor control panel but<strong>to</strong>nsyou can manually override any au<strong>to</strong>matic settings. If required, the <strong>EasyTouch</strong> outdoor control panel can bepassword protected. To access a password protected control panel, the correct four digit password must beentered before access is granted (see page 49).IntelliChlor ® Electronic Chlorine Genera<strong>to</strong>rThe optional IntelliChlor salt chlorination system allows the <strong>EasyTouch</strong>system <strong>to</strong> au<strong>to</strong>matically control water sanitization by using a lowconcentration of salt (sodium chloride) in the pool and spa water. TheIntelliChlor is enabled from the “IntelliChlor” Settings menu (see page 35).IntelliChlor au<strong>to</strong>matically converts the salt in<strong>to</strong> free chlorine which eliminatesbacteria and algae in the pool and spa water. The chlorine will then revertback <strong>to</strong> sodium chloride after killing the bacteria. The outcome of thiscontinuous cycle, practically eliminates the need <strong>to</strong> use sanitizing chemicals inthe pool/spa water. When the pool and spa water is replenished due <strong>to</strong>IntelliChlor ElectronicChlorine Genera<strong>to</strong>rbackwashing or draining, more salt may need <strong>to</strong> be added <strong>to</strong> the pool/spa water. IntelliChlor model IC20 (P/N520554/520556) is designed for swimming pools up <strong>to</strong> 20,000 U.S. gallons (75,000 liters). Model IC40 (P/N520555/520556) is designed for swimming pools up <strong>to</strong> 40,000 U.S. gallons (<strong>15</strong>1,000 liters). IC60 Cell (P/N521105): Designed for pools up <strong>to</strong> 60,000 U.S. gallons (227,124 liters). The pool chlorination amounts mayvary depending on number of pool occupants, temperature, environment conditions, rainfall and other elementsthat might affect the pool water.<strong>Compool</strong>/<strong>EasyTouch</strong> Pool and Spa Control System <strong>Upgrade</strong> Installation and User’s Guide