Maintenance & Inspection Guide Leaded ROL™200 ... - Johnstech

All statements, technicalinformation and recommendationsrelated to the Seller’s productsare based on information believedto be reliable, but the accuracyor completeness thereof is notguaranteed. Before utilizing theproduct, the user shall determinethe suitability of the productfor its intended use. The userassumes all risks and liabilitywhatsoever in connection withsuch use. Any statements orrecommendations of the Sellerwhich are not contained in theSeller’s current publications shallhave no force or effect unlesscontained in an agreement signedby an authorized officer of theSeller. The statements containedherein are made in lieu of allwarranties expressed or implied,including but not limited to theimplied merchantability andfitness for a particular purposewhich warranties are herebyexpressly disclaimed. Seller shallnot be liable to the user or anyother person under any legaltheory, including but not limitedto negligence or strict liability,for any injury or for any direct orconsequential damages sustainedor incurred by reason of the useof any of Seller’s products orservices that were defective.Worldwide Headquarters1210 New Brighton BoulevardMinneapolis, MN 55413-1641 USATel: 612.378.2020Fax: 612.378.2030E-mail: info@johnstech.comwww.johnstech.comRegional/Field Service Office — California, USA2450 Scott BoulevardSanta Clara, CA 95050-2504Tel: 408.448.2020Fax: 408.448.2030www.johnstechhelp.comRegional/Field Service Office — Singapore14 Robinson Road #13-00Far East Finance BuildingSingapore 048545Tel: 65.6385.2389Fax: 65.6323.1839© Copyright 2009 Johnstech InternationalCorporation Specifications subject to change.Specifications subject to change without notice.No part of this document may be reproducedin any form or by any means, electronicor mechanical, including photocopying,recording or by any information storage orretrieval system, without expressed writtenpermission from Johnstech. Johnstech andJohnstech logo are registered trademark sin the USA and other countries. Johnstechproducts and components are covered bypatents and copyrights in the USA and othercountries.For questions about anything contained in thisMaintenance & Inspection Guide, contact your localJohnstech representative.If you are experiencing a technical problem or issue,fill out the online Tech Help Form at:www.johnstechhelp.com ORcontact the nearest Field Service Office.China &EU RoHSCompliantLIT 1448a-0710Printed in the USA on 100% Post-Consumer Recycled Paper.www.johnstech.com©2009 Johnstech International CorporationAll rights reserved.24Your Contact For Higher Performance