Manual - Unvented Gas Log Heater or Vented Decorative Appliance
Manual - Unvented Gas Log Heater or Vented Decorative Appliance
Manual - Unvented Gas Log Heater or Vented Decorative Appliance
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ELECTRICAL WIRING - MILLIVOLTDEB <strong>Unvented</strong> <strong>Gas</strong> <strong>Log</strong>s5. Route wiring harnesses through large hole on side of unit. Mount bracket to side of unit withscrew provided. Figure 226. Attach wiring harness to either TP/TH and TH on control valve <strong>or</strong> to existing wiring harnesswith two (2) 0.250" male spade terminals f<strong>or</strong> remote <strong>or</strong> t-stat option. Figures 22 and 23.7. Install knob to shaft of t-stat sens<strong>or</strong>. Figure 22.8. Place thermo bulb in front of the firebox f<strong>or</strong> incoming air.Wiring HarnessesFP2881ScrewTHERMOSTATSETTINGHIGHKnob26D3317LOWFigure 22 -Install T-Stat Sens<strong>or</strong> to DEB BaseThermo BulbT-Stat Sens<strong>or</strong>and BracketFP2881install TstatTHTP/THWiring HarnessesFP2808Figure 23 -Attach Wiring Harnesses to Control ValveFP2808attach tstat to valve44D0060 17
Change language