FinePix Z2 Manual - Fujifilm Canada

LOADING THE BATTERY AND THE MEDIA3Align the gold marking on the xD-Picture Card slotwith the gold contact area on the xD-Picture Cardand push the card firmly all the way into the slot.Checking the battery chargeTurn the camera on and check the battery level indicator on the LCD monitor.4Gold markingGold contact area●! If the xD-Picture Card is oriented incorrectly, it will not go allthe way into the slot. Do not apply force when inserting anxD-Picture Card.Close the battery cover.1234Lit whiteLit whiteLit redBlinking red1There is ample battery charge.2The battery is almost half charged.3There is insufficient charge left in the battery.The battery will soon run out. Have a newbattery ready.4The battery is depleted. The display will shortlygo blank and the camera will stop working.Replace or recharge the battery.“Á”, “Ä” or “Ô appears as a small iconon the left-hand side of the LCD monitor.●! Depending on the camera mode, the transition from “Ô to“V” may occur more quickly.●! Due to the nature of the battery, the battery level indicator(Ä, à or V) may appear early when the camera isused in cold locations. This is normal. Try warming thebattery in your pocket or a similar location before use.1Getting Ready◆ How to replace the xD-Picture Card ◆Push the xD-Picture Card into the slot and thenslowly remove your finger. The lock is released andthe xD-Picture Card is pushed out.“V” appears as a large icon in the center of theLCD monitor.◆ Auto power off function ◆When the Auto power off function is active, if the camera is left unused for 2 or 5 minutes, this functionturns the camera off (➡P.81).To restore power to the camera to take pictures, briefly close the lens cover completely and then reopenit. To play back images, close the lens cover and hold down the “w” button for about 1 second.1213