FinePix Z2 Manual - Fujifilm Canada

p PHOTO MODE PHOTOGRAPHY˘ QUALITY MODE (NUMBER OF RECORDED PIXELS)Quality setting in Photography modeChoose from 6 settings. Using the table below as a guide, select the setting that best suits youraims.Quality mode◆ Area shot and quality setting ◆Area shot excluding “„” Area shot with “„”N 12 12Sample uses÷ F (2592 × 1944)Printing at up to 10R (25.4 × 30.5 cm) / A4 size÷ N (2592 × 1944)For better quality, select “÷ F”„ (2736 × 1824)3 (2048 × 1536) Printing at up to 6R (15.2 × 20.3 cm) / A5 size2 (1600 × 1200) Printing at up to 4R (10.2 × 15.2 cm) / A6 size` (640 × 480)To use for e-mail or web site✽ See P.39 for information on how to select the quality setting.Normal shooting provides anaspect ratio of 4:3 and “„ ”shooting provides an aspect ratioof 3:2 (same aspect ratio as35 mm film and post card).123p PHOTO MODE PHOTOGRAPHY01 0201 02ISONAUTOSTDPHOTO O MODE01 02N:AUTOSTDPHOTO O MODE160080040020010064AUTO160080040020010064AUTOAUTOû SENSITIVITY1Set the Mode switch to “q”.2Press the “p” button to display the menu on theLCD monitor.●! When “À” NATURAL LIGHT has been selected in “ˇ”SHOOTING MODE, “û” (sensitivity) setting cannot beselected.●! In “r” Movie mode, do not set the “û” (sensitivity) setting.Sensitivity is retained even when the mode settingis changed.1Press “a” or “b” to select “û” (sensitivity).2Press “c”.1Press “a” or “b” to change the setting.2Press the “MENU/OK” button to confirm thesetting.h SettingsAUTO /64/100/200/400/800/1600●! Although higher sensitivity settings will allow you to takepictures in darker locations, they will also increase theamount of speckling in your images. Streaking may also bevisible in shots of scenes such as the night sky.Choose the sensitivity setting that best suits the conditions.When selecting AUTO as the sensitivity setting, thecamera selects the best sensitivity setting for thesubject’s brightness.3Advanced FeaturesN 124 ISO 100When the sensitivity is set to “64”, “100”, “200”,“400”, “800” or “1600”, the selected sensitivitysetting appears on the LCD monitor.●! Only if the sensitivity setting is set to “800” or “1600” and thecamera is turned off, the setting is not retained. When turningthe camera on again, the setting has been set to AUTO.Select “800” or “1600” before taking pictures with “800” or“1600” sensitivity setting.4041