TeSys U LUTM Controller User Manual 03/2008 - Schneider Electric

More documents

Recommendations

Info

Technical characteristics of the LUTM controller48 1743233 03/2008
GlossaryAAny fault"Any fault" relay:This relay has 2 contacts: NO 95-96 and NC 97-98.For optimum protection, contact 95-96 should be wired in series with the contactorcoils.Contact 97-98 is a signaling contact.The relay is energized (95-96 closed and 97-98 open) if and only if:• The controller is powered with 24 V DC• The controller "external fault" input I.6 is at 1• There is no control unit, base or module faultCControl unit fault"Control unit fault" relay:This relay has 1 NC contact (05-06).The relay is energized (05-06 open) when the control unit trips on a thermaloverload, phase loss, phase imbalance or ground fault.Note: The multifunction control unit also trips in the event of: underload,overtorque, prolonged start.1743233 03/2008 49
Page 1: TeSys U LUTM ControllerUser Manual0
Page 6 and 7: Safety InformationPLEASE NOTEElectr
Page 8 and 9: About the BookProduct RelatedWarnin
Page 10 and 11: Setting Up the LUTM ControllerWhat'
Page 12 and 13: Setting Up the LUTM ControllerDescr
Page 14 and 15: Setting Up the LUTM ControllerCompo
Page 16 and 17: Setting Up the LUTM ControllerLUC
Page 18 and 19: Setting Up the LUTM ControllerPrese
Page 20 and 21: Setting Up the LUTM ControllerAssem
Page 22 and 23: Setting Up the LUTM ControllerTrans
Page 24 and 25: Setting Up the LUTM ControllerParti
Page 26 and 27: Setting Up the LUTM ControllerStart
Page 28 and 29: Setting Up the LUTM ControllerSetti
Page 30 and 31: Operation of the LUTM controllerOpe
Page 32 and 33: Operation of the LUTM controllerExa
Page 34 and 35: Operation of the LUTM controllerAdd
Page 36 and 37: Operation of the LUTM controller3-w
Page 38 and 39: Operation of the LUTM controllerCon
Page 40 and 41: Operation of the LUTM controllerSta
Page 42 and 43: Operation of the LUTM controllerAck
Page 44 and 45: Operation of the LUTM controllerAla
Page 46 and 47: Technical characteristics of the LU
Page 50: GlossaryEExternal faultThe tripping
Page 54: You can download this technical pub

TeSys U LUTM Controller User Manual 03/2008 - Schneider Electric

Create successful ePaper yourself

Delete template?

Save as template?