condair oem

5.5 Electric installationA separate electrical installation manual is available for the control unit ECCM, giving all necessarydetails (connection data, diagrams, etc.) for the correct installation of the electrics. The directions in theelectrical installation instructions must be followed. Please also note the following instructions:– All work concerning the electric installation must be performed only by adequately qualified person-nel (electrician or workman with equivalent training). Ascertaining the qualificationsis the customer‘s responsibility.– Caution electrical hazard! The unit incorporating the Condair OEM (e.g. air conditioningcabinet) must be protected in a way that no live components and wires can betouched when the Condair OEM is in operation.– Warning - danger of electric shock! The steam humidifier may be connected toelectric mains only after all installation work has been completed.– Please observe all local regulations concerning the electric installation.– Warning! The electronic components of the control unit are very susceptible to electrostaticdischarges. For the protection of these components, measures must be takenduring all installation work to prevent damage caused by electrostatic discharge(ESD–protection).– Caution! For the electrical installation all regulations according to “DIN EN 60335-1”and “DIN EN 60335-2-98” standards regarding the safety of electrical devices must bestrictly adhered to. In particular, it must be made sure that there is sufficient protectionagainst inadvertent contact with life parts.– For trouble-free operation we recommend using the optional heating contactors (seetable in chapter 4.3.1).30