condair oem

More documents

Recommendations

Info

Removal and installation of drain valvesThe steam cylinder has to be removed first, as already described, before removing the drain valve.41321. Detach electric cable.2. Release hose clamp and detach filling hose.3. Release two fixing screws using Philips screwdriver and remove drain valve.4. Disassemble drain valve.Installation of the drain valve follows the reverse sequence.40
Removal and installation of the inlet valveThe steam cylinder must not be removed, before removing the inlet valve.221144331. Detach electric cable.2. Release hose clamp and detach hose.3. Release union nut of water supply pipe and remove.4. Release two fixing screws using Philips screwdriver and remove inlet valve.Installation of the inlet valve follows the reverse sequence.41
Page 1: Condair OEMSteam humidifierTechnica
Page 5 and 6: 2 For your safetyIntended useSteam
Page 7 and 8: 3.2 DeliveryThe delivery includes:-
Page 9 and 10: 3.4 Steam humidifier constructionMo
Page 11 and 12: 4 Basic planningAll the data necess
Page 13 and 14: 4.2 Options4.2.1 Options overviewTh
Page 15 and 16: 4.3 Accessories4.3.1 Accessories ov
Page 17 and 18: 4.4 Additional planning instruction
Page 19 and 20: Dimensions (in mm) and WeightsOEM 1
Page 21 and 22: 5.3 Steam installation5.3.1 Positio
Page 23 and 24: In positioning the steam distributi
Page 25 and 26: Securing the hoseThe steam hose mus
Page 27 and 28: 5.4 Water installationAll work conc
Page 29 and 30: 5.4.2 Inspecting the water installa
Page 31 and 32: 5.5.1 Electric installation overvie
Page 33 and 34: 6.3 CommissioningIn order to start
Page 35 and 36: 7 Maintenance- All maintenance work
Page 37 and 38: 7.3 Removing and installing partsWa
Page 39: Disassembly and assembly of the cle
Page 43 and 44: 8 Fault eliminationImportant! Most
Page 45 and 46: 8.3 Instructions for fault eliminat
Page 47 and 48: © Walter Meier (Climate Internatio

condair oem

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?