HD-X2 - IRO AB

More documents

Recommendations

Info

Speed settingsHD-X2 13NoteNormally the switch should be left at posistion1 since the feeder automatically calculates thespeed according to yarn consumption. However,with very low speeds or wide looms, it could behelpful to reduce the maximum speed in order toavoid unnecessary acceleration12 34To set the maximum speed rotate the disc to theappropriate position.Mechanical sensors, STAND-ALONE1 = 1400 m/min2 = 1200 m/min3 = 800 m/min4 = 500 m/minMechanical sensors, CAN1 = 1600 m/min2 = 1200 m/min3 = 800 m/min4 = 500 m/minRef. No. 24-893H-2001-02/1232
S/Z adjustmentHD-X2 14With standard ball bearing1. Switch off the feeder.2. Grip the winding disc (1) and, whilst pressing theorange button on the front of the spool body (2),rotate the disc until the button is felt to locate. Aligningthe mark on the winding disc with the line onthe motor house gives the zero separation position.1To adjust, press in the button and revolve the windingdisc in the appropriate direction.21Set the direction of rotation with the switch.(The feeder is deactivated in the standby position (0))0The separation must be distinct, but notexcessive.Ref. No. 24-893H-2001-02/1232
Page 2 and 3: ContentsHD-X2 1Contents............
Page 12 and 13: Voltage supply box / Jumper setting
Page 17 and 18: Sensors settingsHD-X2 16The mechani
Page 20 and 21: Balloon adjustmentHD-X2 19Balloon c
Page 22 and 23: Assembly instructionsHD-X2 21After
Page 24: Declaration of conformityHD-X2 23IR

HD-X2 - IRO AB

Create successful ePaper yourself

Delete template?

Save as template?