general recommendations - safety - AJ Maskin AS

CORRECTIVE MAINTENANCE SHEETSHEET C004REPLACING A COMPONENT ON THESheet 1/1PLATFORM CONTROL PANEL1 - Preliminary operations• Cut off the electric power supply (see § 7.3, page 50).Caution!Do not use the machineduring maintenanceoperations.2 - Removing a component from the platform control panel• Remove the closing plate (1) by unscrewing the four fixing screws.• Mark and disconnect the electric connections of the component to bereplaced.• Remove the component.3 - Replacing a component on the platform control panel• Put a new component and seal into place on the front of the platform controlpanel.NB:If it is a lever switch, adjust the position of the fixing nut and counternut so that the switch lever joint axle is on the same level as the seal,to ensure tightness.1Compact - Optimum• Reconnect the electric connections according to the marks made whendismantling.• Fix the closing plate with the four fixing screws.• Perform the function corresponding to the replaced component to checkthat it works properly.1Star 8 - HM10P (star 10)