general recommendations - safety - AJ Maskin AS

CORRECTIVE MAINTENANCE SHEETSHEET C010 Sheet 1/1REPLACING A HOSECaution!Ensure that oil temperatureis not too high.1 - Preliminary operations• Put the machine in the maintenance configuration (see correspondingparagraph).• Cut off the electric power supply (see corresponding paragraph).2 - Removing a hose• Disconnect the hose from the equipment it connects.NB:Unscrew the hose slowly to allow residual hydraulic pressure todissipate.• Fit caps to the equipment holes to protect them.3 - Replacing a hose• Reconnect a new hydraulic hose.• Put the machine back into the operational configuration.• Make several movements using the replaced hose to purge the hydrauliccircuit.• Check the oil level in the hydraulic oil tank.