thread milling - Horn USA, Inc.

THREAD MILLING (internal)MILLING SHANK TypeMU116with through coolantCutting edge Ø Ds .803″DMaterial of shank: Carbide - Giving a good vibration resistancefor use with InsertTypeU116116Picture = right hand cutting version shownPart number t maxDs l 1l 2d 1dMU116.0625.01B5.118 1.575MU116.0625.02B .169 .803 5.118 2.205MU116.0625.03B 5.906 3.150Further sizes upon request.433 .625Dimensions in inchOrdering note:All milling cutter shanks can be used for right and left hand inserts type 116.Milling cutter shanks with damaged seating can be repaired by HORN.Spare partsMilling shank Screw Torque TORX PLUS® WrenchMU116.0625.0... 5.13T20EP 53 - 58 lbf-in. T20PQD28In the UNITED STATES cal us toll free1 - 888 - 818 HORN