thread milling - Horn USA, Inc.

THREAD MILLING (internal)MILLING SHANK TypeMU313with through coolantDCutting edge Ø Ds .854″Material of shank: Carbide - Giving a good vibration resistancefor use with InsertType313613Picture = right hand cutting version shownPart number 313 613 l 1l 2d 1dZ Ds Z DsMU313.0750.04B4.331 1.772MU313.0750.05B3 .854 6 .8545.118 2.559.630 .750MU313.1515.08A 3 .854 6 .854 7.874 - .445 .625Further sizes upon requestOrdering note:Milling cutter shanks with damaged seating can be repaired by HORN.Dimensions in inchSpare partsMilling shank Screw Torque TORX PLUS® WrenchMU313.0750.04B/05B 5.14T20P 53 - 58 lbf-in. T20PQMU313.1515.08A 2.6.5T8EP 9 - 13 lbf-in. T8PLD34In the UNITED STATES cal us toll free1 - 888 - 818 HORN