P.13A-6 - LIL EVO

MULTIPORT FUEL INJECTION (MFI)13A-51MULTIPORT FUEL INJECTION (MFI) DIAGNOSISCONNECTOR: B-105STEP 9. Check for continuity at volume airflow sensorharness side connector B-105.(1) Disconnect connector B-105 and measure at the harnessside.B-105 (B)7 6 5 4 3 2 1HARNESS CONNECTOR:COMPONENT SIDEAK203496ABB-105 HERNESS CONNECTOR:COMPONENT SIDE7 6 5 4 3 2 1(2) Check for the continuity between terminal No. 5 andground.• Should be less than 2 ohms.Q: Does continuity exist?YES : Go to Step 12.NO : Go to Step 10.AKX01409AJCONNECTOR: C-119STEP 10. Check harness connector C-119 at ECM fordamage.Q: Is the harness connector in good condition?YES : Go to Step 11.NO : Repair or replace it. Refer to GROUP 00E, HarnessConnector Inspection P.00E-2. Then go to Step 13.HARNESSCONNECTOR:COMPONENT SIDEC-119 (Y)38 37 36 35 34 33 32 3146 45 44 43 42 41 40 39AK203646ABTSB Revision