P.13A-6 - LIL EVO

13A-52MULTIPORT FUEL INJECTION (MFI)MULTIPORT FUEL INJECTION (MFI) DIAGNOSISCONNECTOR: B-105STEP 11. Check for open circuit and harness damagebetween volume airflow sensor connector B-105 (terminalNo. 5) and ECM connector C-119 (terminal No. 40).Q: Is the harness wire in good condition?YES : Replace the ECM. Then go to Step 13.NO : Repair it. Then go to Step 13.B-105 (B)7 6 5 4 3 2 1HARNESS CONNECTOR:COMPONENT SIDEAK203496ABCONNECTOR: C-119HARNESSCONNECTOR:COMPONENT SIDEC-119 (Y)38 37 36 35 34 33 32 3146 45 44 43 42 41 40 39AK203646ABCONNECTOR: C-119STEP 12. Check harness connector C-119 at ECM fordamage.Q: Is the harness connector in good condition?YES : Replace the volume airflow sensor. Then go to Step13.NO : Repair or replace it. Refer to GROUP 00E, HarnessConnector Inspection P.00E-2. Then go to Step 13.HARNESSCONNECTOR:COMPONENT SIDEC-119 (Y)38 37 36 35 34 33 32 3146 45 44 43 42 41 40 39AK203646ABSTEP 13. Perform the OBD-II drive cycle.(1) Carry out a test drive with the drive cycle pattern. Refer toGROUP 13A, Diagnostic Function − OBD-II Drive Cycle −Procedure 6 − Other Monitor P.13A-6.(2) Check the diagnostic trouble code (DTC).Q: Is DTC P0102 set?YES : Repeat the troubleshooting.NO : The procedure is complete.TSB Revision