PT Series Operator & Parts Manual - McConnel

More documents

Recommendations

Info

Gearbox Maintenance – PT180 ModelGearbox Mountings BoltsCheck the gearbox mounting nuts and bolts at the intervals stated in the maintenanceschedule and retighten if required. Locations of the mounting nuts and bolts are indicated inthe photo below left.Gearbox mounting nuts and bolts location 1) Oil Filler Plug 2) Oil Level PlugOil LevelCheck the gearbox oil level at the intervals stated in the maintenance schedule; ensure themachine is lowered to the ground and located on a firm level site to perform this task.Checking the oil level in the gearbox is by removal of the Oil Level Plug, indicated ‘2’ in thephoto above right, the level is correct when the oil is up to the bottom of the level plug orifice.If the gearbox requires ‘topping up’ add oil via the filler plug indicated ‘1’ in the photo until itstarts to seep from the level plug orifice; replace both plugs securely to complete the task.Gearbox oil levels must be checked on a fortnightly basis during the season and the oilcompletely drained and replaced annually.Draining & RefillingTo drain oil from the gearbox it is necessary to remove the gearbox from the machine.Remove both the filler and the level plugs and invert the gearbox over a suitable container toallow the oil to drain completely. Replace the gearbox on the machine before refilling to thelevel stated above. Refer to recommended lubricants page for gearbox oil specifications.35
Gearboxes & Couplings Maintenance – PT240 & PT270 ModelsThe PT270 machine is equipped with 3 gearboxes, a single central gearbox and two outergearboxes; these are all housed beneath the top cover of the machine. PT240 machines arealso equipped with 3 gearboxes as per above but also feature an additional primary gearboxlocated on the mainframe.Access to the gearboxes is by unhooking the two bonnet catches on the front of the coverand tilting it rearwards on its hinges.Gearboxes Mounting BoltsCheck the mounting nuts and bolts of all gearboxes at the intervals stated in themaintenance schedule and retighten if required.Locations of the mounting nuts and bolts are indicated in the photos below.Centre Gearbox Mounting Bolts LocationOuter Gearbox Mounting Bolts Location (RH shown)1) Bonnet Catch 2) Gearbox (RH) 3) Top CoverPrimary Gearbox Mounting Bolts - PT240 Models only36
Page 4 and 5: 2. REMEDIES AND PROCEDURES2.01. The
Page 6: ROTARY MOWER INSPECTION AND MAINTEN
Page 11 and 12: TRACTOR PRE-OPERATION InspectionPow
Page 14: LIST OF CONTENTSPage No.Operation S
Page 17 and 18: PT240 ModelA) Machine Body/DeckB) G
Page 19 and 20: SPECIFICATIONSDescription PT180 Mod
Page 21 and 22: The operator and all support person
Page 23 and 24: Ensure that a PTO shield is install
Page 25 and 26: LOCATION OF SAFETY & INSTRUCTIONAL
Page 27 and 28: UNPACKING THE MACHINE - PT180 Model
Page 29 and 30: UNPACKING THE MACHINE - PT270 Model
Page 31 and 32: ATTACHING THE MACHINE - PT180 Model
Page 37 and 38: PTO DRIVESHAFT INSTALLATIONThe PTO
Page 39 and 40: TRANSPORTING THE MACHINEFor transpo
Page 41 and 42: MOVING FROM TRANSPORT TO WORK POSIT
Page 43 and 44: MACHINE OPERATIONOperating the Mach
Page 45 and 46: Headstock Position (PT180 Models on
Page 47 and 48: CLEANING THE MACHINECleaning Proced
Page 49: Maintenance SafetyWARNING: Before a
Page 53 and 54: Draining & RefillingTo drain oil fr
Page 55 and 56: Blade Carrier & Blade MaintenanceWA
Page 57 and 58: LUBRICANTSRecommended LubricantsSup
Page 60 and 61: PARTS MANUALPT180 / 240 / 270PASTUR
Page 62 and 63: DECK MODULE - PT180 ModelsModule(s)
Page 64 and 65: DECK & COVERS MODULES - PT240 Model
Page 66 and 67: COVER MODULE - PT270 ModelsModule(s
Page 68 and 69: SKIDS MODULE - PT240 & PT270 Models
Page 70 and 71: PTO MODULE - PT180 ModelsModule(s):
Page 72 and 73: DRIVE MODULE - PT270 ModelsModule(s
Page 74 and 75: ROTOR MODULE - PT180 ModelsModule(s
Page 76 and 77: ROTOR MODULE - PT270 ModelsModule(s
Page 78 and 79: BASIC DECAL KIT - PT240 & 270 Model
Page 80 and 81: SPECIFIC DECAL KIT - PT240 ModelsMo
Page 82: STACKING LEGS - PT180, PT240 & PT27

PT Series Operator & Parts Manual - McConnel

Create successful ePaper yourself

Delete template?

Save as template?