IPR-12 Manual - Scintrex

KEYPAD AND DISPLAY DESCRIPTIONSThe Off-Line displays show the numeric slice, calculated data, numeric and graphdisplays after a measurement is terminated. The following are Off-Line displays:• Numeric Slice displays• Calculated Data displayNote: The On-line numeric and graph displays are also available.Numeric Slice DisplayThis display shows the chargeability slices in numeric form in mV/V. This is thefirst display to appear when you turn on your instrument if the previous data wasnot recorded. This display normally appears after a reading is terminated or it canbe selected before the data is recorded with the NUMBER key followed by avertical scroll.DIP 1 DIP 2 DIP 3 DIP 4M1 mmm.mm mmm.mmM2 mmm.mm mmm.mmM3 mmm.mm mmm.mmM4 mmm.mm mmm.mmM5 mmm.mm mmm.mmM6 mmm.mm mmm.mmM7 mmm.mm mmm.mmM8 mmm.mm mmm.mmM9 mmm.mm mmm.mmM10 mmm.mm mmm.mmM11 mmm.mm mmm.mmM12 mmm.mm mmm.mmM13 mmm.mm mmm.mmM14 mmm.mm mmm.mmBAT1: bbbNotes:Shows the chargeability slices in numeric form in mV/V for dipoles 1 to 4 (DIP1- DIP 4) while another page shows the data for dipoles 5 to 8.M1..M14 are the slice numbers. Up to four slices may be missing from the top.See the Specifications section - 'IP Transient Program' for further information.3-21