DSX12 Instruction & Programming Manual - MacGregor Industries

86: TransferThe TRANSFER function allows one 12X transmitter to transfer amodel memory for a specific model to another 12X transmitter.This function is also used to transfer a model memory to theincluded PC Data Transfer allowing unlimited model memorystorage and backup of your model’s programming. The Transferfunction is also used to receive data from another 12X or fromthe PC Data Transfer.Note: The sending and receiving transmitters mustboth be 12X’s or the PC Data Transfer device and a 12X.Transfer is not possible with any other system.Preparing the 12X to Receive a Model Transfer1. Hold the ENT button while plugging the Trainer cord intothe back of the transmitter to obtain the SYSTEM List. Plugthe other end of the DSC cord into another 12X transmitterwhile holding the ENT button and after the following,prepare that transmitter for transfer send as describedabove.2. Highlight and select TRANSFER in the SYSTEM Menu toobtain the Transfer display.3. If RECEIVE is already displayed, continue with the next step.If TRANSMIT is displayed, highlight and select TRANSMIT,changing it to RECEIVE.4. Select the model memory that is to receive the data byhighlighting and selecting the model name/memory numberand then scrolling to and selecting the model memory thatis to receive the data. Select an unused model memory ora memory that contains data for a model that is no longerneeded as the data in this model memory will be replacedby the model memory that is transferred and will bepermanently lost.Note: The receiving model name/memory number cannot be the currently selected model. If you wish to receivea model in the currently selected model name/memorynumber, go to the model select function and select adifferent model, then reenter the transfer function andfollow the instructions above.5. Press START on the left side of the display. Stand-byappears at the bottom of the display indicating that thesystem is ready to receive data. Follow the next steps toprepare the sending transmitter for memory transfer.A-17