DSX12 Instruction & Programming Manual - MacGregor Industries

Throttle HoldThe throttle hold function is normally used as a kill switchfor glow-powered airplanes or as a safety/ arming switchfor electric-powered aircraft. It can also be used to preseta programmed throttle position. For example with electricsailplanes it can be used to give full power when the switchis activated. The throttle hold function switch position anddirection is assigned in Device Select. The actual programmingof the throttle hold position is done in Code 16 Throttle Holdscreen in the Function mode (see page A-33).Note: Throttle hold is defaulted to the mix switch.To Assign Throttle Hold to a Switch1. In Device Select, highlight and select Throttle Hold usingthe Roller.2. Using the Selector, highlight and select MIX SW nextto THRO Hold. When selected, 12 switch options anddirections appear: Highlight and select the desired throttlehold switch and direction.A-23