General Catalogue Chemistry - BECO Internacional LTDA.

chemistry panel system
Power supplies
665 497
CPS-mains distributor
On the rear of the mains distributor panel there
are three safety mains sockets which may be
used to supply the mains voltage to connected
equipment. The connected equipment may be
switched on and off through switches on the
front panel.
Rating: 250 V AC / 16 A
Dimensions: 100 x 297 x 115 mm
Experiment panel: 100 x 297 mm
Weight: 1.0 kg
666 471
CPS-mains supply switchable
Mains outlet socket on experiment panel,
switchable via bridging plugs, PLC signal, TTL
signal or contact thermometer.
Switching capacity of the relay: 1200 VA max.
Fuse: 6.3 A
Mains voltage: 230 V AC
Dimensions: 100 x 300 x 65 mm
Experiment panel: 100 x 297 mm
Weight: 0.8 kg
667 824
665 497
CPS power supply unit 24 V
666 471
For supplying power e.g. to the CPS-gas chromatograph
(> 665 490).
Power supply: 230 V, 50/60 Hz
Output: 24 V DC/3 A
Dimensions: 100 x 297 x 110 mm
Panel: 100 x 297 mm
Weight: 1.7 kg
667 824
666 411
110 LEYBOLD DIDACTIC · GENERAL CATALOGUE CHEMISTRY
Sensors
CPS ethanol sensor
Used to measure ethanol either in solution or in
the gas collection chamber.
Applications:
· Process monitoring in the manufacture of
ethanol or fermented acetic acid
· Determining the ethanol concentration in
liquids
· Determining the ethanol content in the breath
Sensor with sintered ceramic plate in a stainless
steel housing; the sensitivity can be adapted
to suit the particular measurement task by
adjusting the amplifier gain. The electronics are
located in a separate housing on the rear.
Analog output, 0 to 2V, for connecting an analog
chart recorder or computer interface. Can
be connected to the CASSY interface device.
With O-ring and special membrane (two).
Sensor
Length: 350 mm
Dia.: 20 mm
Experiment panel: 100 x 297 mm
Length of lead: 1700 mm (coiled cord, stated
length appiles to fully extended cable)
Weight: 0.8 kg
665 486
CPS flow-through photometer
Is intended for use as a detector in biotechnology
in preparative organic and biochemical
analysis with HPLC
Measurement wavelength: 254 nm
Detector: photocell
Cell: quartz, optical path length 2 mm
Recorder output: 0 ... +2 V
Pump connection: via DIN sockets
Control connection: via DIN sockets
Power supply: 230 V/50 Hz
Dimensions: 100 x 297 x 143 mm
Weight: 2.4 kg
666 470
CPS-holder with clamp, height-adjustable
For attachment of equipment using a universal
clamp or devices with stand rod (e.g. stirrer
motor). The holder is height-adjustable along a
slot for adjustment to different spacings. Panel
can be secured against movement.
Dimensions: 10 cm x 29.7 cm x 12 cm
Weight: 0.5 kg