General Catalogue Chemistry - BECO Internacional LTDA.

visual aids
443 15
Base plate with sockets
Fits the experiment projectors (e.g. > 443 10)
for the vertical projection of experiment setups,
for which an electrical voltage is supplied,
for example, glass plates with electrodes
(> 442 63). With circular-shaped aperture and
clamping springs. Voltage supply via short
wires attached in the terminal screws.
Aperture diameter: 47/50 mm
Terminal screws-span width: 2 mm
Connection: 4-mm sockets
Dimensions: 10 cm x 9 cm x 4 cm
Weight: 0.1 kg
443 14
284 LEYBOLD DIDACTIC · GENERAL CATALOGUE CHEMISTRY
Vertical projection stand
Fits FANTEX multipurpose projector
(> 443 10). Made of steel plate with handle
for easy transport and when setting up the
projector in the stand.
Dimensions: 26 x 13 x 13 cm
Weight: 1.5 kg
443 10
FANTEX multi-purpose projector
Experiment projector for 35 mm slides and for
demonstrating physical and chemical
processes using projectable experiment
setups. With pre-adjusted halogen lamp
(> 443 01), equipment holder, slide carrier;
objective adjustable on guide rods. Step switch
with economy circuit for extending lamp life.
Lamp: 24 V, 150 W
Objective:
Focal length: 100 mm
Aperture ratio: 1:2.8
Slide carrier:
Slide format: 50 x 50 mm
Aperture: 40 x 40 mm
Connection: 115/230 V, 50/60 Hz
(switchable), via mains cable
Power consumption: 230 W
Dimensions: 20 x 12 x 10 cm
Weight: 4.7 kg
443 01
Incandescent lamp V 24
Overvoltages up to 6.5 V are acceptable.
For > 443 10.
Voltage in V: 24
Power in W: 150
443 12
Inverting and deviating prism
Fits FANTEX multipurpose projector
(> 443 10 ). For image inversion or ray
deviation, e. g. for vertical projection.
Isosceles right angle prism, reflective hypotenuse
surface. With adjustable swivel axis.
In clamp mount.
443 13
Microobjective 20 mm
Fits the FANTEX multipurpose projector
(> 443 10 ). For horizontal or vertical projection.
Tube in holder with clamping screws for
mounting on the guide rods of the projector.
Image detail: approx. 10 mm dia.
Magnification:
100 : 1 (for 2 m projection distance and
1 m image diameter)
Dimensions: 10 cm x 9 cm x 6 cm
Weight: 0.1 kg