SEL-751A Settings Sheets - CacheFly

Date _______________
SEL-751A Settings Sheets
Global Settings (SET G Command)
SET.27
of 66
Group Selection
GRP CHG DELAY (0–400 sec) TGR :=
SELECT GROUP1 (SELOGIC) SS1 :=
SELECT GROUP2 (SELOGIC) SS2 :=
SELECT GROUP3 (SELOGIC) SS3 :=
Phasor Measurement (PMU)
EN SYNCHRO PHASOR (Y, N) (All subsequent PMU settings
Hidden if EPMU :=N)
EPMU :=
MESSAGES PER SEC (1, 2, 5, 10) MRATE :=
STATION NAME (16 characters) PMSTN :=
PMU HARDWARE ID (1–65534) PMID :=
VOLTAGE DATA SET (V1, ALL, NA) (Hidden if no voltages) PHDATAV :=
VOLT COMP ANGLE (–179.99 to 180.00 deg)
(Hidden if PHDATAV := NA)
VCOMP :=
CURRENT DATA SET (I1, ALL, NA) PHDATAI :=
CURRENT COMP ANGLE (–179.99 to 180.00
deg)(Hidden if PHDATAI := NA)
ICOMP :=
NUM ANALOG (0–4) NUMANA :=
NUM 16-BIT DIGTAL (0, 1) NUMDSW :=
TRIG REASON BIT 1 (SELOGIC) TREA1 :=
TRIG REASON BIT 2 (SELOGIC) TREA2 :=
TRIG REASON BIT 3 (SELOGIC) TREA3 :=
TRIG REASON BIT 4 (SELOGIC) TREA4 :=
TRIGGER (SELOGIC) PMTRIG :=
CTRL BITS DEFN (NONE, C37.118) IRIGC :=
Breaker Failure
52A INTERLOCK (Y, N) 52ABF :=
BK FAILURE DELAY (0.00–2.00 sec) BFD :=
BK FAIL INITIATE (SELOGIC) BFI :=
Arc-Flash Protection
(Hidden If Voltage Card With Arc-Flash Detection Not Included, see Table 1.1)
AF PH OC TRP LVL (OFF, 0.50–100.00 A {5 A nom. phase},
0.10–20.00 A {1 A nom. phase})
Note: All settings below are Hidden if 50PAFP := OFF
AF N OC TRP LVL (OFF, 0.50–100.00 A {5 A nom. neutral},
0.10–20.00 A {1 A nom. neutral})
50PAFP :=
50NAFP :=
SENSOR 1 TYPE (NONE, POINT, FIBER) AFSENS1 :=
Date Code 20090501 Instruction Manual SEL-751A Relay