www.joskin.com

More documents

Recommendations

Info

Meadow injectors The JOSKIN meadow injectors are fitted with discs or skids. The range is available in two types of injectors: Multi-Action and Solodisc. Standardized frame Lighting A road lighting system is part of the standard equipment of the injectors. The highly <strong>com</strong>pact design and the folding system of the injector lead to a particularly limited overhang at the back of the slurry tanker, which makes it possible to significantly reduce the strains on the slurry tanker. In option, it is possible to choose truck-type lights. Pincers The meadow injectors are mounted on the same type of support. This standardization of the frame makes it possible to interchange the spreading elements. These single-beam frames are made of high tensile steel offering the best <strong>com</strong>promise between strength and lightness. The injectors are standard fitted with mechanical anti-drip pincers which automatically release the injection pipe when the injection element touches the ground (and inversely when the element is lifted from the ground). -14-
Meadow injectors Each pincer is fitted with a rounded jaw and a pinching stop in order to limit the wear to the rubber injection cone as much as possible. Hydraulic pincers are also available in option both on the Multi- Action and Solodisc. Free steering elements The injection elements are made up of 2 outlets and are fixed to the chassis by means of an axis. As a result, they can pivot by 30° in bends (15° to the left and 15° to the right) and the user does not have to lift the machine and does not damage the grass. Lockmatic The models that are more than three meters wide are fitted with a double acting (DA) hydraulic folding system in order to abide by the prescribed transport width. In this case, the folding system is fitted with the Lock- Matic © automatic locking in order to enhance the driving safety as much as possible, namely on the road. This locking device is operated by the same hydraulic function as the folding system, thanks to the steered valves. ‘‘Wet surface’’ device The ‘‘Wet surface kit’’ valve: the Solodisc works by applying a constant pressure on the linkage. As a result, it is possible, when arriving in a humid place, that the injector goes deeper into the ground. Therefore, in order to maintain the same working depth everywhere, the Solodisc can be equipped with the ‘‘Wet surface kit’’ device allowing to lift the rear tool when going from a dry zone to a humid zone (see explanations page 9). - 15 - -15-
Page 1 and 2: Spreading tools range www.joskin.co
Page 3 and 4: Spreading tools Type Name Illustrat
Page 5 and 6: linkages Compact tool lifting devic
Page 7 and 8: ecommended equipment Electronic flo
Page 9 and 10: Hydraulic controls Sequential block
Page 11 and 12: Arable injectors Control of the hyd
Page 13: Terraflex/2 - Terraflex/3 General p
Page 17 and 18: JOSKIN multi-action Control of the
Page 19 and 20: JOSKIN Solodisc Discs The Solodisc
Page 21 and 22: multitwist boom The JOSKIN Multitwi
Page 23 and 24: Penditwist boom Opening sequence of

www.joskin.com

Create successful ePaper yourself

Delete template?

Save as template?