www.joskin.com

JOSKIN multi-action
Control of the hydraulic functions
Concerning the hydraulic controls,
the Multi-Action requires
the use of the Easymatic+
sequential block. This block
operates the macerator, the
linkage and the tank valve.
However, it is not fitted with
the function ensuring a constant
pressure on the linkage,
as the Multi-Action works
thanks to its own weight. In
option, it is possible to install
an automatic reverser for the
macerator with or without nitrogen
balls (Switch-Matic).
The electric reverser with manual
control in the cabin is also available in option on this type of
injector.
If the Multi-Action is fitted with hydraulic pincers, it will then have to
be equipped with an Instamatic sequential block. This block operates
- beside the macerator, the linkage and the tank valve - the
opening and closing of the pincers.
Options
Two other options can turn out to be particularly judicious on the
Multi-Action:
• the spring suspension
for the linkage:
this equipment
makes it possible
to take a part of
the load of the injector
in order to
avoid this one from
sinking too deeply
into humid and
spongy ground
• discs (Ø 250 x 3
mm) can be placed
in front of
the shares of the
Multi-Action to
work on grounds
covered with a lot
vegetal residue
Type
Work (m)
Widths
Transport (m)
Number of
elements
Elements
Space (cm)
between shares
Folding
Number of macerator
outlets
(= nber of elements)
Weight (kg)
3010/14 MA 3.01 3.00 7 21.5 - 14 440
4300/20 MAH 4.30 2.60 10 21.5 Hydraulic 20 860
5160/24 MAH 5.16 2.60 12 21.5 Hydraulic 24 980
6020/28 MAH 6.02 2.60 14 21.5 Hydraulic 28 1088
6880/32 MAH 6.88 2.60 16 21.5 Hydraulic 32 1240
7740/36 MAH 7.74 2.60 18 21.5 Hydraulic 36 1580
- 17 -
-17-