www.joskin.com
Spreading & injection equipment programme - joskin
Spreading & injection equipment programme - joskin
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Meadow injectors<br />
Each pincer is fitted with a rounded jaw and a pinching stop in order<br />
to limit the wear to the rubber injection cone as much as possible.<br />
Hydraulic pincers are also available in option both on the Multi-<br />
Action and Solodisc.<br />
Free steering elements<br />
The injection elements are made up of 2 outlets and are fixed<br />
to the chassis by means of an axis. As a result, they can pivot<br />
by 30° in bends (15° to the left and 15° to the right) and the<br />
user does not have to lift the machine and does not damage<br />
the grass.<br />
Lockmatic<br />
The models that are more<br />
than three meters wide are<br />
fitted with a double acting<br />
(DA) hydraulic folding system<br />
in order to abide by the<br />
prescribed transport width.<br />
In this case, the folding system<br />
is fitted with the Lock-<br />
Matic © automatic locking in<br />
order to enhance the driving safety as much as possible, namely<br />
on the road. This locking device is operated by the same hydraulic<br />
function as the folding system, thanks to the steered valves.<br />
‘‘Wet surface’’ device<br />
The ‘‘Wet surface kit’’ valve: the Solodisc works by applying a constant<br />
pressure on the linkage. As a result, it is possible, when arriving<br />
in a humid place, that the injector goes deeper into the ground.<br />
Therefore, in order to maintain the same working depth everywhere,<br />
the Solodisc can be equipped with the ‘‘Wet surface kit’’ device<br />
allowing to lift the rear tool when going from a dry zone to a humid<br />
zone (see explanations page 9).<br />
- 15 -<br />
-15-