www.joskin.com
Spreading & injection equipment programme - joskin
Spreading & injection equipment programme - joskin
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
twinjet boom<br />
The Twinjet spreading boom makes it possible to spread slurry in a<br />
traditional way by means of a ‘‘dual-nozzle’’ system. The two nozzles<br />
have a swinging scatterer at their end, allowing to spread over<br />
a very large width.<br />
The swinging scatterer is activated by the spreading pressure,<br />
<strong>com</strong>bined with an ingenious mechanical system. Thanks to this design,<br />
slurry is thrown out alternately in one and the other direction,<br />
so that these sheets offer a very low air resistance.<br />
The slurry transfer device is based on the <strong>com</strong>pression system of<br />
the spreader. At the exit of the tank, the slurry is distributed through<br />
a distribution box with two outlets, then it is expelled towards the<br />
swinging scatterers, which distribute it in sheets, the width of which<br />
can be adjusted.<br />
The distribution box has two Ø 125 mm outlets with quick coupling<br />
and includes a deflecting<br />
plate, holding back most of<br />
the foreign bodies (‘‘stone<br />
trap’’). This stone trap is then<br />
emptied easily by an access<br />
to the distribution box.<br />
The boom, which is mounted<br />
on cross-pieces with<br />
height adjustment or on linkage<br />
(option), is fitted with<br />
a hydraulic folding system<br />
operated by two DA cylinders.<br />
The JOSKIN spreading booms are fitted with self-lubrificating<br />
bushings.<br />
Type Spreading widths (m) Number of nozzles Folding<br />
15/2 RM 15 2 Hydraulic<br />
18/2 RM 18 2 Hydraulic<br />
21/2 RM 21 2 Hydraulic<br />
24/2 RM 24 2 Hydraulic<br />
-20-