TSM Tool Stand
TSM Tool Stand Manual - ATI Industrial Automation
TSM Tool Stand Manual - ATI Industrial Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Quick-Change Installation and Operation Manual<br />
Document #9610-20-1114-05<br />
2.2.9 Proximity Sensor<br />
The proximity sensor screws directly into the sensor holder. The proximity sensor provides a signal<br />
indicating the tool is located in the tool stand.<br />
Item Part number Refer to Drawing in: QC-Models<br />
PNP 3-Wire DC<br />
Sensor<br />
8590-9909999-45 Section 9.27—Sensor Holders QC-40 ~ QC-<br />
110<br />
2.3 <strong>TSM</strong> System with <strong>Tool</strong> Hanger Mounting<br />
The <strong>Tool</strong> Hanger Mounting is compatible with QC-20 through QC-71 <strong>Tool</strong> Changers and includes a rigid<br />
block that interfaces with the tool hanger. The mount assembly includes the mounting hardware, and is<br />
designed to mount to extruded rail components and the flats on the <strong>Tool</strong> Changer. The assembly can be<br />
mounted to any other surface that has the corresponding mounting features.<br />
<strong>Tool</strong> Plate<br />
Figure 2.4—<strong>Tool</strong> Hanger Mounting<br />
<strong>Tool</strong> Hanger<br />
<strong>Tool</strong> Hanger Mounting Module<br />
Sensor<br />
Post<br />
Module<br />
Horizontal<br />
Module<br />
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel: 919.772.0115 • Fax: 919.772.8259 • www.ati-ia.com • Email: info@ati-ia.com<br />
16