TSM Tool Stand

2.4.2 Rail Assemblies
Quick-Change Installation and Operation Manual
Document #9610-20-1114-05
The Rail assembly mounts to the base assembly. The standard rail is an aluminum extrusion and in
a variety of lengths. Customers can request custom lengths when ordering.
Rail Assemblies
Item Part number Refer to Drawing in:
Post Rail 914mm (36”) 3710-20-3435
Post Rail 1016mm (40”) 3710-20-3382
Post Rail 1220mm (48”) 3710-20-3318
Post Rail 1520mm (60”) 3710-20-3334
Section 9.25—Post Modules
Post Rail 1828mm (72”) 3710-20-3322
*Note: May specify other rail lengths – cut charge will apply.
2.4.3 Gusset Assembly
The Gusset assembly provides structural support at the base of the assembly. The gusset assembly
mounts to the base assembly and includes mounting hardware. Note: Tabs must be removed from
the gusset to allow flush contact to base assembly.
Item Part number Refer to Drawing in:
Gusset 9120-TSS-GA-1030 Section 9.25—Post Modules
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel: 919.772.0115 • Fax: 919.772.8259 • www.ati-ia.com • Email: info@ati-ia.com
19