Reaction vessels for vacuum and pressure

More documents

Recommendations

Info

102 Glass Flask Holders Universal holders Universal holders for flat flange flasks Retained flask body, removable lid. Made from stainless steel, comprising compression ring with fixed support rods, retention ring and and springs. Cat. no. DN100 7010.00 DN150 7015.00 Retained flask lid, removable body Made from stainless steel, comprising compression ring, two circular springs, support fork and two adjustable support rods. Cat. no. DN60 (one support rod) 7106.00 DN100 7110.00 DN120 7112.00 DN150 7115.00 DN200 7119.00 Individual parts: Compression ring, stainless steel Cat. no. DN100 7120.00 DN120 7122.00 DN150 7125.00 DN200 7127.00 Support fork, stainless steel 7128.00 Support rods, stainless steel 7129.00 Mounting block for flask holders. Drilled 34.5 mm in centre. With locking screws. Cat. no. 7130.00
Fire suppression troughs Fire suppression troughs, made from chromium-nickel steel The chromium-nickel steel fire suppression trough effectively prevents liquid fires and offers the following advantages: Escaping inflammable liquids (burning or not) are pass through the gauze and are caught in the trough. They are thus removed from the source of ignition. Burning fluids caught in the trough are extinguished from lack of oxygen. The chromium-nickel steel construction makes the trough resistant to heat and corrosion from reagents such as acids and alkalis. In contrast to aluminium troughs, the use of chromium-nickel steel ensures that no spontaneously inflammable organometallic compounds are produced. Once caught in the trough, the liquid can be poured off almost completely into containers. The costly and troublesome mopping up with glass or mineral wool and their subsequent storage are eliminated. The mesh can be easily removed, allowing the trough to be quickly and easily cleaned. Notice The trough should be of such a size that the amount of liquid to be caught does not exceed 2/3 of the trough volume. Dimensions [W x D x H] Fire suppression trough 450 mm x 450 mm x 120 mm Other sizes can be manufactured Experimental fire with n-heptane, trough size 45 x 45 x 12 cm, ambient 16°C Trough without mesh. Volume 600 ml, height of flame 2.2 m. n-heptane completely burnt. Cat. no. Fire suppression trough 310 BV Trough with mesh. Filled with 3 x 2 l volumes of burning n-heptane. Flame extinguished in 2 - 5 sec for each 2 l volume. After the trial 5.6 litres of unburnt n-heptane were recovered. DBGM DBGM 7701762 7701762 Brüssel Brüssel 1978 1978 Goldmedaille Goldmedaille Goldmedaille 103
Page 1:
Reaction vessels for pressure and v
Page 4 and 5:
2 54470 Bernkastel-Kues Deliveries
Page 6 and 7:
Dimensions 4 Reaction vessels for v
Page 8 and 9:
6 Cylindrical-conical pressure vess
Page 10 and 11:
8 Reaction vessels for vacuum and p
Page 12 and 13:
PTFE Klingersil Weight Volume Press
Page 14 and 15:
PTFE Klingersil Weight Volume Pessu
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
18 Reaction vessels for vacuum and
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
24 10 litre pressure vessel, rated
Page 28 and 29:
Page 30 and 31:
28 Custom and special purpose vesse
Page 32 and 33:
30 Reactor system with lifting stag
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
36 Accessories Fittings and spare p
Page 40 and 41:
38 Accessories Drain valves and acc
Page 42 and 43:
Analogue pressure gauge Connection
Page 44 and 45:
42 Accessories Safety devices for v
Page 46 and 47:
44 Accessories Thermometers, thermo
Page 48 and 49:
46 Accessories Adaptors for ports i
Page 50 and 51:
Lid gaskets for vessels 48 Accessor
Page 52 and 53:
50 Lifting jacks for vessels Fixed
Page 54 and 55: 52 Stirrer drives Stirrer drive wit
Page 56 and 57: 54 Torque measurement Torque measur
Page 58 and 59: 56 Stirrerheads ‘O’ and oil fil
Page 60 and 61: 58 Stirrerheads ’O’ ring sealed
Page 62 and 63: 60 Stirrerheads ’O’ ring sealed
Page 64 and 65: 62 Stirrerheads Mechanically sealed
Page 70 and 71: Stirrerhead Cat. no. Fixing B29 M24
Page 72 and 73: Stirrerhead Cat. no. Fixing B45 M33
Page 74 and 75: Stirrerhead Cat. no. Fixing M33 x 1
Page 76 and 77: Stirrerheads Magnetically coupled s
Page 78 and 79: 76 Stirrer drive couplings and shie
Page 80 and 81: 78 Stirrers Anchor stirrers and sti
Page 82 and 83: 80 Stirrers Impeller stirrers and P
Page 84 and 85: 82 Stirrers Sloped anchor stirrers
Page 86 and 87: 84 Conical joint stirrerheads Conic
Page 88 and 89: 86 Conical joint stirrerheads Stirr
Page 90 and 91: 88 Thermostats and accessories Conn
Page 92 and 93: 90 Thermostats and accessories Base
Page 94 and 95: Cat. no. Male M18 x 1.5 Female M16
Page 96 and 97: 94 Thermostats and accessories Acce
Page 98 and 99: 96 Thermostats and accessories Spar
Page 100 and 101: 98 Thermostats and accessories Ther
Page 102 and 103: 100 Thermostats and accessories 9 k
Page 106 and 107: 104 Raction vessel built to GMP req
Page 108 and 109: 106 General information Materials:
Page 110 and 111: 108 Index T Tachometer ............
Page 112 and 113: 110 Transportable turnkey plant, ex
Page 114 and 115: 112
show all

Reaction vessels for vacuum and pressure

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?