Reaction vessels for vacuum and pressure

54
Torque measurement
Torque measurement
Stirrer shaft torque is measured using a noncontact
torque sensor, whose output is independent
of the shaft rotation speed.
Torque measurement range 2 - 50 Nm, with 1.5
overload margin. Can be statically calibrated.
Tachometer range 800 to 6 000 rpm.
Compact housing containing a photoelectric
tachometer sensor. With maintenance-free bearings
and connection cable.
Display unit in a bench cabinet or a 19" 3HE rack
mounting to DIN 41 494.
Contains power supply for sensors and signal
handling system.
Power supply 230 V / 50 Hz
Signal processing system has controls for setting
gain and zero. LED power on indicator, digital
displays of torque and rotation speed. Two
switchable torque ranges: x1 and x10.
Outputs: ± 0 - 10 V DC or 4 - 20 mA (0 - 20 mA)
current loop for both torque and rotation speed.
Nominal
torque
Max speed Cat. no.
[Nm] [rpm]
2 8000 35500.02
5 8000 35500.05
10 8000 35500.10
20 6000 35500.20
50 6000 35500.50
Rack mounted version can is installed in a cabinet
800 x 800 x 350 mm
With connection cable. All 0 - 10 V DC or 4 - 20 mA
(0 - 20 mA) outlets brought to the outside.
Cabinet fully wired.
Cat. no.
35501.00
Sensor unit
Supply voltage 24 V DC
Torque output: ± 10 V, Tachometer output: 360
impulses / revolution
Includes connection cable, but not the display
unit.
Nominal
torque
Max speed Cat. no.
[Nm] [rpm]
2 8000 35510.02
5 8000 35510.05
10 8000 35510.10
20 6000 35510.20
50 6000 35510.50