Reaction vessels for vacuum and pressure

More documents

Recommendations

Info

38 Accessories Drain valves and accessories, stainless steel Item Drain plug, with knobs Cat. no. Standard vessel fitting 10334.00 Drain valve, straight outlet Fitted with a metal to metal seal. The outlet at the lower end is not suitable for connection to pipework. M24 x 1.5 10333.10 M33 x 1.5, sealing cone B29 10333.20 Drain valve, straight outlet, with PTFE seal Fitted with a PTFE ring to provide a gas tight seal. For use up to 250 °C. 10333.11 Drain valve, lateral outlet Fitted with a metal to metal seal. Pressure tight to 50 Bar. Outlet is threaded M24 x 1.5 male. Suitable for connection to pipework. 10335.00 As 10335.00, but heated 10335.10 Drain valve, lateral outlet, with PTFE seal Fitted with a PTFE ring to provide a gas tight seal. For use up to 250 °C. 10335.01 Straight connector for valve 10335.00 With cap nut and olive, 18 mm external diameter PTFE seal 10335.51 Klingersil seal 10335.53 Elbow connector for valve 10335.00 With cap nut and olive, 18 mm external diameter PTFE seal 10335.61 Klingersil seal 10335.63 Drain valve, ball type With welded on flange. Very low dead space when an anchor stirrer is used. Seals made from PTFE. For use up to 250 °C. Available only as original equipment. DN 15 10336.15 DN 32 10336.32 DN 20 10336.20 DN 40 10336.40 DN 25 10336.25 DN 50 10336.50 10335.5* 10334.00 10333.10 10335.00 10336.15 to 10336.50 10335.6* Available only as original equipment
Accessories Lateral connections and inbuilt Pt100 thermometers (Only available as original equipment) Example of a custom vessel with a sampling facility. The drawing shows a vessel body fitted with screwed-in outlet valve 10335.00 and sampling outlet to one side. The sample collector is heated and has a volume of about 50 ml. The sample is fed into the collector through DN15 ball valves. A sample collector for viscous products can be attached to the M24 thread on the outlet of the drain valve. Further details on request. Lateral connections to vessels. They can be fitted to vacuum vessels, pressure vessels, or reservoirs. Fitted with PTFE gaskets for use up to 250 °C. Thread (BSP) Vessel size* Cat. no. [mm] [ltr] 1/4" – ∅ 4 1 upwards 15014.00 3/8" – ∅ 6 1 upwards 15038.00 1/2" – ∅ 10 2 upwards 15012.00 3/4" – ∅ 15 5 upwards 15034.00 *Other sizes on request Pt100 thermometers in vessel bottom A measurement point that takes a Pt100 thermometer can be fitted to the bottom of the vessel. The Pt100 thermometer has a pressure tight housing and 1.6 m long connection cable. The gaskets are so arranged to allow the amount of protrusion of the thermometer into the vessel to be adjusted. Cat. no. Assembly including thermometer 15009.00 Replacement thermometer with 1.6 m cable 52009.01 Gasket set, PTFE, three pieces 15009.11 Gasket set, Klingersil, for use to 400 °C 15009.14 ∅6 3/8" BSP 15038.00 15009.00 39
Page 1: Reaction vessels for pressure and v
Page 4 and 5: 2 54470 Bernkastel-Kues Deliveries
Page 6 and 7: Dimensions 4 Reaction vessels for v
Page 8 and 9: 6 Cylindrical-conical pressure vess
Page 10 and 11: 8 Reaction vessels for vacuum and p
Page 12 and 13: PTFE Klingersil Weight Volume Press
Page 14 and 15: PTFE Klingersil Weight Volume Pessu
Page 20 and 21: 18 Reaction vessels for vacuum and
Page 26 and 27: 24 10 litre pressure vessel, rated
Page 30 and 31: 28 Custom and special purpose vesse
Page 32 and 33: 30 Reactor system with lifting stag
Page 38 and 39: 36 Accessories Fittings and spare p
Page 42 and 43: Analogue pressure gauge Connection
Page 44 and 45: 42 Accessories Safety devices for v
Page 46 and 47: 44 Accessories Thermometers, thermo
Page 48 and 49: 46 Accessories Adaptors for ports i
Page 50 and 51: Lid gaskets for vessels 48 Accessor
Page 52 and 53: 50 Lifting jacks for vessels Fixed
Page 54 and 55: 52 Stirrer drives Stirrer drive wit
Page 56 and 57: 54 Torque measurement Torque measur
Page 58 and 59: 56 Stirrerheads ‘O’ and oil fil
Page 60 and 61: 58 Stirrerheads ’O’ ring sealed
Page 62 and 63: 60 Stirrerheads ’O’ ring sealed
Page 64 and 65: 62 Stirrerheads Mechanically sealed
Page 70 and 71: Stirrerhead Cat. no. Fixing B29 M24
Page 72 and 73: Stirrerhead Cat. no. Fixing B45 M33
Page 74 and 75: Stirrerhead Cat. no. Fixing M33 x 1
Page 76 and 77: Stirrerheads Magnetically coupled s
Page 78 and 79: 76 Stirrer drive couplings and shie
Page 80 and 81: 78 Stirrers Anchor stirrers and sti
Page 82 and 83: 80 Stirrers Impeller stirrers and P
Page 84 and 85: 82 Stirrers Sloped anchor stirrers
Page 86 and 87: 84 Conical joint stirrerheads Conic
Page 88 and 89: 86 Conical joint stirrerheads Stirr
Page 90 and 91:
88 Thermostats and accessories Conn
Page 92 and 93:
90 Thermostats and accessories Base
Page 94 and 95:
Cat. no. Male M18 x 1.5 Female M16
Page 96 and 97:
94 Thermostats and accessories Acce
Page 98 and 99:
96 Thermostats and accessories Spar
Page 100 and 101:
98 Thermostats and accessories Ther
Page 102 and 103:
100 Thermostats and accessories 9 k
Page 104 and 105:
102 Glass Flask Holders Universal h
Page 106 and 107:
104 Raction vessel built to GMP req
Page 108 and 109:
106 General information Materials:
Page 110 and 111:
108 Index T Tachometer ............
Page 112 and 113:
110 Transportable turnkey plant, ex
Page 114 and 115:
112
show all

Reaction vessels for vacuum and pressure

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?