Reaction vessels for vacuum and pressure

More documents

Recommendations

Info

94 Thermostats and accessories Accessories for 2 – 4 kW thermostats Platinum resistance thermometers Pt100/1 DIN resistance thermometer, type EL115. With 0.45 m long cable and plug. Response time 1 second. Cat. no. For thermostats models 500-13 and earlier 51009.11 For thermostats models 500-14 and later 51009.00 Pt100/0.3 DIN resistance thermometer, type EL115. With 0.25 m long cable and plug. Response time 0.3 second Cat. no. For thermostats models 500-13 and earlier 51009.33 For thermostats models 500-14 and later 51009.22 Pt100/1 DIN resistance thermometer with various dip length, cable and plug, For measurement of internal temperatures of vessels. (see Pages 39 and 44) Glass to Metal connector For connection of Schott flanges to metal hoses. Nominal diameter 10 mm. Supplied with pressure equalising spring and PTFE gasket. Cat. no. For DN 10 Schott flange 51012.00 For DN 15 Schott flange 51013.00 Connectors for plastic hoses Threaded male M18 x 1.5. For hoses diam 9 - 13 mm Cat. no. 51020.00 Threaded female M18 x 1.5 Hose diameter ∅ 8 mm ∅ 10 mm ∅ 13 mm Cat. no.** 51021.08 51021.10 51021.13 Thermostat holder for mounting a thermostat onto a 34 mm rod or tube, such as supplied with a stirrer drive motor mounting stand. 51017.00 Heat exchanger holder, for attachment to a 34 mm diam. rod or tube. 51027.00 Mounting plate for a thermostat, heat exchanger and high temperature valve. (not illustrated) 55041.00 51027.00 DN 51009.00 51020.00 51021.** M18x1.5 51012.00 51013.00 M18x1.5 M18x1.5 M18x1.5 51017.00 ∅34
Thermostats and accessories Accessories for 2 - 4 kW thermostats Heat exchangers The tube and shell heat exchangers provide for the rapid cooling of heat transfer fluid. All stainless steel construction PTFE gaskets Useable up to 350 °C with continuous water throughput, or with flow controlled by the valve 50119.00 in conjunction with the programmable controller (see layout on page 99 upper). Heat transfer fluid connections: male, M18 x 1.5 Water connections: 12 mm plastic hose connectors. Cat. no. Tube surface area 0.16 m² 50111.00 Tube surface area 0.32 m² 50112.00 High Temperature Valve DN10 The high temperature valve is designed for switching the flow of heat transfer fluid at temperatures up to 350 °C. For use with the programable controller to provide automatic cooling. All-or-nothing operation. Actuator rod sealed within metal bellows All parts in contact with heat transfer fluid made from stainless steel Fitted with a high temperature electromagnet (normal operating temperature 85 °C). Powered from programmable controller 55105. With connection cable. Input: Female M18 x 1.5 Outputs: Male M18 x 1.5 Cat. no. 50117.00 High Temperature Proportioning Valve DN10 As above, but motor driven, allowing continuously variable opening. Driven by programmable controller 55105. Position of valve is fed back to the controller. Opening proportional to the difference between the actual temperature and the set temperature. Cat. no. 50117.11 M18x1.5 M18x1.5 M18x1.5 M18x1.5 M18x1.5 95
Page 1:
Reaction vessels for pressure and v
Page 4 and 5:
2 54470 Bernkastel-Kues Deliveries
Page 6 and 7:
Dimensions 4 Reaction vessels for v
Page 8 and 9:
6 Cylindrical-conical pressure vess
Page 10 and 11:
8 Reaction vessels for vacuum and p
Page 12 and 13:
PTFE Klingersil Weight Volume Press
Page 14 and 15:
PTFE Klingersil Weight Volume Pessu
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
18 Reaction vessels for vacuum and
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
24 10 litre pressure vessel, rated
Page 28 and 29:
Page 30 and 31:
28 Custom and special purpose vesse
Page 32 and 33:
30 Reactor system with lifting stag
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
36 Accessories Fittings and spare p
Page 40 and 41:
38 Accessories Drain valves and acc
Page 42 and 43:
Analogue pressure gauge Connection
Page 44 and 45:
42 Accessories Safety devices for v
Page 46 and 47: 44 Accessories Thermometers, thermo
Page 48 and 49: 46 Accessories Adaptors for ports i
Page 50 and 51: Lid gaskets for vessels 48 Accessor
Page 52 and 53: 50 Lifting jacks for vessels Fixed
Page 54 and 55: 52 Stirrer drives Stirrer drive wit
Page 56 and 57: 54 Torque measurement Torque measur
Page 58 and 59: 56 Stirrerheads ‘O’ and oil fil
Page 60 and 61: 58 Stirrerheads ’O’ ring sealed
Page 62 and 63: 60 Stirrerheads ’O’ ring sealed
Page 64 and 65: 62 Stirrerheads Mechanically sealed
Page 70 and 71: Stirrerhead Cat. no. Fixing B29 M24
Page 72 and 73: Stirrerhead Cat. no. Fixing B45 M33
Page 74 and 75: Stirrerhead Cat. no. Fixing M33 x 1
Page 76 and 77: Stirrerheads Magnetically coupled s
Page 78 and 79: 76 Stirrer drive couplings and shie
Page 80 and 81: 78 Stirrers Anchor stirrers and sti
Page 82 and 83: 80 Stirrers Impeller stirrers and P
Page 84 and 85: 82 Stirrers Sloped anchor stirrers
Page 86 and 87: 84 Conical joint stirrerheads Conic
Page 88 and 89: 86 Conical joint stirrerheads Stirr
Page 90 and 91: 88 Thermostats and accessories Conn
Page 92 and 93: 90 Thermostats and accessories Base
Page 94 and 95: Cat. no. Male M18 x 1.5 Female M16
Page 98 and 99: 96 Thermostats and accessories Spar
Page 100 and 101: 98 Thermostats and accessories Ther
Page 102 and 103: 100 Thermostats and accessories 9 k
Page 104 and 105: 102 Glass Flask Holders Universal h
Page 106 and 107: 104 Raction vessel built to GMP req
Page 108 and 109: 106 General information Materials:
Page 110 and 111: 108 Index T Tachometer ............
Page 112 and 113: 110 Transportable turnkey plant, ex
Page 114 and 115: 112
show all

Reaction vessels for vacuum and pressure

Create successful ePaper yourself

Delete template?

Save as template?