Reaction vessels for vacuum and pressure

More documents

Recommendations

Info

28 Custom and special purpose vessels Reservoirs Reservoirs have a conical bottom, which ensures that the contents are completely drained. They can be supplied with or without a heating jacket. The lid is welded on permanently forming a pressure seal, and is fitted with a pressure gauge, an excess pressure valve, a plug valve and a B29 conical adaptor with cap. The outlet has a plug valve and a short connection tube. See page 29 Pressure filter vessel with paper holder The vessel has a cylindrical pressure-tight body. An internal, flat, horizontal partition carries a filter paper. The conical lower section collects the filtrate. The vessels are available with or without heating jackets. See page 32 Glass vessel with metal lid For special purposes a glass vessel with a metal lid is available. The associated safety cage, in which accessories such as the stirrer drive and thermostat are mounted, adds to the operator’s safety. If required, a fire suppression trough (page 97) can be placed under the glass vessel. The lid will accept the same fittings that are used for all-metal vessels. See page 33 Stainless steel transport vessels Transport vessels have two lateral handles and have a loose-fitting lid. A stand is available to prevent the vessel from being tipped over accidentally. The vessels can be supplied with an outlet tap. See page 34 Tube-and-shell and Liebig condensers Tube-and-shell condensers with surface areas from 0.16 m² to 1 m² are available. Both ends can be fitted with various types of connector. Liebig condensers are straight tube with cooling jackets. We also manufacture coiled condensers and columns with various packings to customers’ requirements. See page 35 Custom manufacture of vessels During manufacture vessels can be equipped with special features such as: Drain valves of various types and sizes Rectangular or round lateral sightglasses Temperature measurement points in the bottom or side of the vessel Injection or sampling points in the bottom or side of the vessel See pages 21, 23, 37, 39
Custom and special purpose vessels Reservoir, cylindrical-conical pattern Reservoir with heating jacket H 205 4571 ∅ R3/8" ∅14x2 4571 R3/8" 3/8" BSP Valve 20451.00 3/8" BSP Connection tube 3/8" BSP Vessel Nominal Cat. no. PTFE gasket* Volume Pressure Dimensions Heating jacket capacity [ltr] with jacket without jacket [ltr] [Bar] ∅ ∅ [mm] H [mm] Volume [ltr] Pressure [Bar] 1 10190.01 10195.01 1,3 25 140 172 0,6 6 2 10191.01 10196.01 2,3 25 160 210 0,9 6 5 10192.01 10197.01 5,3 15 220 285 1,3 6 10 10193.01 10198.01 11 10 273 348 1,9 6 1–10 10199.01 Connection tube, 3/8" BSP upper inlet, 3/8" BSP underneath outlet * for Klingersil gaskets change the last digit of the catalogue no. to 4. 29
Page 1: Reaction vessels for pressure and v
Page 4 and 5: 2 54470 Bernkastel-Kues Deliveries
Page 6 and 7: Dimensions 4 Reaction vessels for v
Page 8 and 9: 6 Cylindrical-conical pressure vess
Page 10 and 11: 8 Reaction vessels for vacuum and p
Page 12 and 13: PTFE Klingersil Weight Volume Press
Page 14 and 15: PTFE Klingersil Weight Volume Pessu
Page 20 and 21: 18 Reaction vessels for vacuum and
Page 26 and 27: 24 10 litre pressure vessel, rated
Page 32 and 33: 30 Reactor system with lifting stag
Page 34 and 35: 32 Custom and special purpose vesse
Page 36 and 37: 34 Custom and special purpose vesse
Page 38 and 39: 36 Accessories Fittings and spare p
Page 40 and 41: 38 Accessories Drain valves and acc
Page 42 and 43: Analogue pressure gauge Connection
Page 44 and 45: 42 Accessories Safety devices for v
Page 46 and 47: 44 Accessories Thermometers, thermo
Page 48 and 49: 46 Accessories Adaptors for ports i
Page 50 and 51: Lid gaskets for vessels 48 Accessor
Page 52 and 53: 50 Lifting jacks for vessels Fixed
Page 54 and 55: 52 Stirrer drives Stirrer drive wit
Page 56 and 57: 54 Torque measurement Torque measur
Page 58 and 59: 56 Stirrerheads ‘O’ and oil fil
Page 60 and 61: 58 Stirrerheads ’O’ ring sealed
Page 62 and 63: 60 Stirrerheads ’O’ ring sealed
Page 64 and 65: 62 Stirrerheads Mechanically sealed
Page 70 and 71: Stirrerhead Cat. no. Fixing B29 M24
Page 72 and 73: Stirrerhead Cat. no. Fixing B45 M33
Page 74 and 75: Stirrerhead Cat. no. Fixing M33 x 1
Page 76 and 77: Stirrerheads Magnetically coupled s
Page 78 and 79: 76 Stirrer drive couplings and shie
Page 80 and 81:
78 Stirrers Anchor stirrers and sti
Page 82 and 83:
80 Stirrers Impeller stirrers and P
Page 84 and 85:
82 Stirrers Sloped anchor stirrers
Page 86 and 87:
84 Conical joint stirrerheads Conic
Page 88 and 89:
86 Conical joint stirrerheads Stirr
Page 90 and 91:
88 Thermostats and accessories Conn
Page 92 and 93:
90 Thermostats and accessories Base
Page 94 and 95:
Cat. no. Male M18 x 1.5 Female M16
Page 96 and 97:
94 Thermostats and accessories Acce
Page 98 and 99:
96 Thermostats and accessories Spar
Page 100 and 101:
98 Thermostats and accessories Ther
Page 102 and 103:
100 Thermostats and accessories 9 k
Page 104 and 105:
102 Glass Flask Holders Universal h
Page 106 and 107:
104 Raction vessel built to GMP req
Page 108 and 109:
106 General information Materials:
Page 110 and 111:
108 Index T Tachometer ............
Page 112 and 113:
110 Transportable turnkey plant, ex
Page 114 and 115:
112
show all

Reaction vessels for vacuum and pressure

Create successful ePaper yourself

Delete template?

Save as template?