Reaction vessels for vacuum and pressure
Reaction vessels for vacuum and pressure
Reaction vessels for vacuum and pressure
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Stirrerheads<br />
’O’ ring sealed stirrerhead, shaft diameter 10 mm<br />
Cooling water<br />
outlet<br />
Stirrer<br />
Oil reservoir<br />
Product<br />
Inert gas<br />
Uses an oil film controlled by an ‘O’ ring <strong>for</strong> sealing<br />
the shaft<br />
Suitable <strong>for</strong> <strong>pressure</strong>s up to 25 Bar<br />
All parts in contact with product protected against<br />
corrosion<br />
Suitable <strong>for</strong> use up to 350 °C with cooling<br />
Suitable <strong>for</strong> light duty application in <strong>vessels</strong> from<br />
1–2 litres capacity<br />
St<strong>and</strong>ard equipment <strong>for</strong> 1–2 litre JUVO <strong>vessels</strong><br />
Cooling water<br />
inlet<br />
Oil reservoir<br />
Item Cat. no.<br />
Stirrerhead with ‘O’ ring seal<br />
Shaft diameter 10 mm,<br />
threaded M33 x 1.5 10310.00<br />
6x6<br />
∅40<br />
28<br />
∅10<br />
M33x1.5<br />
164<br />
18 2<br />
16<br />
28<br />
Recommended zone of application<br />
(Pressure v Rotation speed)<br />
rpm<br />
1400<br />
1050<br />
700<br />
350<br />
UPM<br />
Pressure 10 20 [Bar]<br />
Item Cat. no.<br />
Stirrerhead with ‘O’ ring seal<br />
Stainless steel with a PTFE bearing<br />
Threaded M33 x 1.5 10310.11<br />
57