08.12.2012 Views

Imatest Documentation

Imatest Documentation

Imatest Documentation

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Imatest</strong> <strong>Documentation</strong><br />

Stepchart<br />

The incident light level in lux is entered in a box near the lower-left of the<br />

Stepchart input dialog box. If it is blank or zero, sensitivity will not be<br />

calculated.<br />

Colorcheck<br />

The incident light level in lux is entered in a box near the lower-center of<br />

the Colorcheck input dialog box. If it is blank or zero, sensitivity will<br />

not be calculated.<br />

SFRplus<br />

Results ( Ssat , SSOS , and the incident lux level) are displayed in the upper-right of<br />

the Stepchart noise detail figure (the second figure when all are checked).<br />

Results ( Ssat , SSOS , and the incident lux level) are displayed in the Density<br />

response plot in the upper-left of the Colorcheck noise detail figure (the<br />

second figure when all are checked).<br />

The incident light level in lux is entered in the Settings area of the SFRplus settings & options window, which is opened by<br />

clicking on Settings & options in the Rescharts SFRplus setup window. If it is blank or zero, sensitivity will not be<br />

calculated.<br />

Results ( Ssat , SSOS , and the incident lux level) are displayed in the lower right of the Density response plot in the Tonal<br />

response & gamma display.<br />

54 of 451

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!