ServiceManual

ToC
01 ENGINE
SERVICE MANUAL MARINE ENGINES
For engines with rubber frame seal (slot variant)
18 Force out frame sealing from engine housing slot by
means of broad screwdriver.
NOTE:
Do not puncture frame seal.
19 Loosen one hexagon screw (SW10) (ill.14/pos.1).
Remove protective sheet.
06.01 ill.13
1
For 4 cyl. engines
06.01 ill.14
20 First loosen 11 Allen head screws (SW5) (ill.15/
pos.1), then 7 hexagon screws (SW17) (ill.15/pos.2).
1
2 2
For 6 cyl. engines
06.01 ill.15
21 First loosen 13 Allen head screws (SW5) (ill.17/
pos.1), then 3 hexagon screws (SW13) (ill.17/pos.2),
and at last 4 hexagon screws (SW17) (ill.17/pos.3).
3
1
2
3
06.01 ill.17
Page ENGINE - 66 Z001019/0_6_July 2008