19.07.2017 Views

ServiceManual

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ToC SERVICE MANUAL MARINE ENGINES<br />

ELECTRICAL SYSTEM<br />

3<br />

1<br />

4<br />

2<br />

06.10.05 Check Sensors and Switches<br />

10.04 ill. 9<br />

06.10.05.01 A Check rack position feedback sensor<br />

B14 (= connector X14)<br />

In case of defective rack position feedback sensor<br />

B14, service codes (35) and (36) will flash.<br />

NOTE:<br />

First always check cables and connections.<br />

10.05 A ill.1<br />

Final check:<br />

Disassemble rack position feedback sensor<br />

from control solenoid.<br />

1 Check resistance between terminals A and C with a<br />

digital ohmmeter. Resistance must be between<br />

2,2 kOhm ± 10 %.<br />

C<br />

A<br />

10.05 A ill.2<br />

2 Measure resistance between terminals B and C with<br />

extended shaft. Resistance must be<br />

0,5 kOhm ± 10 %. C<br />

B<br />

10.05 A ill.3<br />

Z001019/0_6_July 2008 Page ELECTRICAL SYSTEM - 85

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!