ServiceManual

More documents

Recommendations

Info

ToC 05 COOLING SYSTEM SERVICE MANUAL MARINE ENGINES 05.01.06 Exchange tandem cooler Disassembly Preparation: vent fuel system, refer to 03.09/1 1. Remove drain plug (ill.1/pos.1) to drain the raw water system. 2. Loosen hose clamp (ill.1/pos.2) of hose to raw water pump, and remove hose. 3. Loosen hose clamp of hose bend (ill.1/pos.3) to intercooler, and remove hose bend. 4 Loosen fuel return line (ill.1/pos.4) (SW19) mm and hydraulic lines. 5. Unscrew two Allen head screws (SW6) (ill.1/pos.5) of clamps, and remove tandem cooler (ill.1/pos.6). Assembly Assembly is done in reverse order. ATTENTION: Use new sealing rings. 5 2 4 6 01.06 ill.1 3 1 05.01.07 Exchange additional oil cooler (used only at type 246) 5 3 Disassembly Preparation: loosen clamp oil dipstick (SW10) 1. Remove drain plug at tandem cooler to drain the raw water system. 2. Loosen union nuts of oil hoses (ill.1/pos.1) (SW 21) at the additional oil cooler. 2 1 6 1 3. Loosen hose clamp (ill.1/pos.2) of hose to raw water pump. 01.07 ill.1 4. Loosen hose clamp of hose (ill.1/pos.3) to tandem cooler. 5. Unscrew two Allen head screws (SW6) (ill.1/pos.5) of clamps, and remove additional cooler (ill.1/pos.6). Assembly Assembly is done in reverse order. ATTENTION: Use new sealing rings for oil hoses. Secure union nuts of oil hoses with LOCTITE 243 and tighten with a torque of 20 NM +/-2 Page COOLING SYSTEM - 26 Z001019/0_6_July 2008
ToC SERVICE MANUAL MARINE ENGINES 05 COOLING SYSTEM 05.01.08 Exchange triple cooler Disassembly Preparation: vent fuel system, refer to 03.09, item 1 3 5 3 1. Remove drain plug at triple cooler to drain the raw water system.(ill.1/pos.1) 1 2 4 6 2. Loosen union nuts of oil hoses (ill.1/pos.2) (SW 32) at the triple oil cooler. 3. Loosen hose clamps (ill.1/pos.3) of hose to raw water hoses. 01.08 ill.1 4. Loosen fuel lines (ill.1/pos.4) (SW 19) and hydraulik lines (SW 22) 5. Unscrew three Allen head screws (SW6) (ill.1/pos.5) of clamps, and remove triple cooler (ill.1/pos.6). Assembly Assembly is done in reverse order. ATTENTION: Use new sealing rings for oil hoses. Secure union nuts of oil hoses with LOCTITE 243 and tighten with a torque of 45 NM +/-2 05.03 PIPES, THERMOSTAT 05.03.01 Coolant pipes and hoses Remove defective hoses by loosening the respective hose clamps and replace. ATTENTION: Tightning toose clamps with a torque of 3,5 Nm. Z001019/0_6_July 2008 Page COOLING SYSTEM - 27
Page 1 and 2:
STEYR MARINE ENGINES 4 CYLINDERS +
Page 3 and 4:
PREFACE STEYR MOTORS GmbH has devel
Page 5 and 6:
TABLE OF CONTENTS (MAIN ASSEMBLY GR
Page 7 and 8:
05 Cooling system 05.01 Cooler, hea
Page 9 and 10:
ToC SERVICE MANUAL MARINE ENGINES G
Page 11 and 12:
Page 13 and 14:
ToC SERVICE MANUAL MARINE ENGINES A
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
ToC SERVICE MANUAL MARINE ENGINES O
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
ToC SERVICE MANUAL MARINE ENGINES 0
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
ToC SERVICE MANUAL MARINE ENGINES R
Page 157 and 158:
SERVICE MANUAL MARINE ENGINES 03 FU
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174: SERVICE MANUAL MARINE ENGINES 03 FU
Page 193 and 194: SERVICE MANUAL MARINE ENGINES 03.14
Page 195 and 196: ToC SERVICE MANUAL MARINE ENGINES 0
Page 201 and 202: SERVICE MANUAL MARINE ENGINES 05 CO
Page 223: ToC SERVICE MANUAL MARINE ENGINES 0
Page 269 and 270: L J 6 5 4 2 3 1 23 ToC SERVICE MANU
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
ToC SERVICE MANUAL MARINE ENGINES I
Page 287 and 288:
ToC SERVICE MANUAL MARINE ENGINES E
Page 289 and 290:
Page 291 and 292:
ToC SERVICE MANUAL MARINE ENGINES I
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
°C °F 250 80 40 100 120 0 L MAIN
Page 301 and 302:
°C °F 250 80 40 100 120 0 MAIN RP
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331:
show all

ServiceManual

Create successful ePaper yourself

Delete template?

Save as template?