19.07.2017 Views

ServiceManual

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ToC SERVICE MANUAL MARINE ENGINES<br />

01 ENGINE<br />

01.06.05 Replace oil suction pipe<br />

Preparation:<br />

Exchange engine housing,<br />

01.06.01.<br />

1 Unscrew 2 screws (ill.2/pos.1) on main bearing block.<br />

Remove plate (only possible at 4 cyl. engines) - (ill.2/<br />

pos.2).<br />

06.05 ill.1<br />

2<br />

2 Pull of oil suction pipe. Check O-ring (ill.2/pos.3),<br />

replace if necessary.<br />

ATTENTION: During assembly of oil suction pipe,<br />

take care that no bracings occur.<br />

Assembly is done in reverse order.<br />

3 Grease O - ring during assembly.<br />

4 Secure the screws with thread protection LOCTITE<br />

243 and tighten with a torque of 10 Nm +/- 1.<br />

1<br />

06.05 ill.2<br />

3<br />

Z001019/0_6_July 2008 Page ENGINE - 73

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!