19.07.2017 Views

ServiceManual

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ToC SERVICE MANUAL MARINE ENGINES<br />

01 ENGINE<br />

13 Put new timing belt onto crankshaft sprocket and<br />

camshaft sprocket (marked tooth of camshaft sprocket<br />

points at upper edge of camshaft housing).<br />

ATTENTION: Pay attention to arrow marker<br />

(direction of rotation) on timing belt.<br />

00.03 ill.9<br />

14 Mount vibriation damper. Slightly grease thread and<br />

flange of 3 TORX screws (Grease P/N Z012222/0)<br />

and tighten with torque wrench to 135 Nm +/-7.<br />

00.03 ill.10<br />

NOTE:<br />

Recheck torque after first test run.<br />

00.03 ill.11<br />

15 Tightly put on timing belt from crank shaft sprocket<br />

over water pump drive wheel and camshaft sprocket,<br />

and position camshaft sprocket with marked tooth<br />

towards upper sealing edge of camshaft housing.<br />

00.03 ill.12<br />

Z001019/0_6_July 2008 Page ENGINE - 9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!