19.07.2017 Views

ServiceManual

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

03 FUEL SYSTEM SERVICE MANUAL MARINE ENGINES<br />

7 Insert unit injector extracting lever No. VR 00126/0<br />

(ill.5/pos.1) in recess of rocker arm between rocker<br />

arm body and roller, as shown, and fully press down<br />

spring of unit injector. Set display to zero.<br />

1<br />

NOTE:<br />

Slowly release unit injector spring.<br />

Read total indicating travel (ill.5/pos.2)<br />

on dial gauge.<br />

2<br />

02.06 ill.5<br />

8 Turn adjusting screw (ill.6/pos.1) with screwdriver<br />

and set to the value as listed in below table. Hold<br />

adjusting screw in this position and tighten hexagon<br />

nut (ill.6/pos.2) by means of torque wrench No.<br />

2300743/0 and tee-handled socket wrench (SW17)<br />

with a torque of 30 Nm +/-3.<br />

1<br />

2<br />

02.06 ill.6<br />

Engine setting values for engines with a build date before 2007 (

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!