ServiceManual

ToC
06 ELECTRICAL SYSTEM
SERVICE MANUAL MARINE ENGINES
06.06.06 REPLACE FUSES
Preparatory works:
Engine out of operation,
disconnect battery.
Replace automatic circuit breaker
1 Swing off E-box base plate.
2 Disconnect cable from automatic circuit breaker.
3 Loosen 2 hexagon screws (ill.1/pos.1) (SW1/4") and
take off thermal circuit breaker (ill.1/pos.2).
3
2
NOTE:
For assembly, seal cable screw
connections with rubber varnish.
06.06 ill.1
1
Replace fuses
1 Remove E-box cover.
2 Remove fuse protection cap.
Pull out fuses (ill.1/pos.3)
Replace defect fuse.
Page ELECTRICAL SYSTEM - 42 Z001019/0_6_July 2008