Powers Buyers Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ADHESIVE ANCHORS<br />
Sleeve / Sieve<br />
Sleeves / sieves provide easy anchoring in any type of hollow base material. They are designed to support<br />
adhesive during the curing process, preventing costly waste due to loss of adhesive in base material cavities.<br />
Suitable for use in brick, block and hollow core concrete. Fully fill with adhesive before installing sieves into<br />
position. Mesh sleeve / sieves can be cut and crimped to suit base material configuration.<br />
NYLON SLEEVE / SIEVES<br />
Size Length Drilled<br />
Hole Ø<br />
M8 80 12 10 N/A AAS1280-PWR<br />
M10 85 16 10 N/A AAS1685-PWR<br />
M10 130 16 10 N/A AAS16130-PWR<br />
M12-16 85 20 10 N/A AAS2085-PWR<br />
M12-16 130 20 10 N/A AAS20130-PWR<br />
M12-16 200 20 10 N/A AAS20200-PWR<br />
Box<br />
Qty<br />
Carton<br />
Qty<br />
Part<br />
No.<br />
MESH SLEEVE / SIEVES<br />
Size Length Drilled<br />
Hole Ø<br />
M8 1,000 12 1 50 MS121000-PWR<br />
M10 - M12 1,000 16 1 50 MS161000-PWR<br />
M16 1,000 22 1 25 MS201000-PWR<br />
Retaining Cap<br />
INJECTION ADHESIVE ACCESSORIES FOR OVERHEAD / HORIZONTAL APPLICATIONS<br />
<strong>Powers</strong> threaded rod retaining caps are designed for use as an aid with<br />
anchor installation in wall and overhead applications. The retaining cap<br />
helps retain the adhesive in the anchor hole and hold the anchor rod<br />
centred in the hole until the adhesive sets.<br />
Box<br />
Qty<br />
Carton<br />
Qty<br />
Part<br />
No.<br />
Size<br />
Drilled<br />
Hole Ø<br />
Box<br />
Qty<br />
Carton<br />
Qty<br />
M8 10 10 N/A RC8-PWR<br />
M10 12 10 N/A RC10-PWR<br />
M12 14 10 N/A RC12-PWR<br />
M16 18 10 N/A RC16-PWR<br />
M20 24 10 N/A RC20-PWR<br />
Part<br />
No.<br />
Installation - Over Head*<br />
1 2 3 4<br />
2X 2X 2X<br />
5 6 7 8 9 10<br />
min.<br />
10 cm<br />
Retaining<br />
Cap<br />
Retaining<br />
Cap<br />
e.g.<br />
20˚C<br />
*Must only use adhesives recommended for overhead applications.<br />
98 www.powers.com.au Detailed performance data is available for all <strong>Powers</strong> products